Use the model preset on the wizard, as Bill is suggesting
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Setup t-rex 550e first recomended settings https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1315 |
Page 1 of 1 |
| Author: | datamedic [ Wed 23. Mar 2016 21:18:28 ] |
| Post subject: | Setup t-rex 550e first recomended settings |
any settings to start with for the t-rex 550 with ds610 -620 servos? cyclic and tail gain etc ? thank you in advance |
|
| Author: | bill rob [ Thu 24. Mar 2016 13:35:12 ] |
| Post subject: | Re: Setup t-rex 550e first recomended settings |
Hi,if you follow the wizard you should discover the settings for your heli,I had to go through the set up a good few times to get it into my head. |
|
| Author: | jgiannakas [ Thu 24. Mar 2016 13:53:34 ] |
| Post subject: | Setup t-rex 550e first recomended settings |
Use the model preset on the wizard, as Bill is suggesting
|
|
| Author: | Alyon187 [ Sat 26. Mar 2016 13:12:45 ] |
| Post subject: | Re: Setup t-rex 550e first recomended settings |
I actually just setup this heli for a friend a week or so ago w a red spirit. So far ive found that rudder delay of 5, head gain of 60, piro consistancy at 160 and tail gain (common gain at 1.0) at 75 was a good starting point. This is where im at right now but isnt the final settings as I havent been able to tune it much more. But those settings should get you at good starting point. Or do what everyone else says and just use the set Template in the model menu. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|