It is currently Sun 24. Nov 2024 0:45:25

All times are UTC + 1 hour





Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
 Post subject: wow 2.0
PostPosted: Tue 23. Feb 2016 20:23:52 
Offline

Joined: Mon 22. Jun 2015 5:50:05
Posts: 123
This one might be set out to soon. I upgraded 2 electric and all went well. Had to move 1&3 on one but that was all.
Then I went to my nitro and all went bad. Spent 2 hrs after update and eventully had to go back to 1.3. All controls were wrong, and I mean bad, tried swapping 1&3 no good. trex 600 dfc N.


Top
 Profile  
 
 Post subject: Re: wow 2.0
PostPosted: Tue 23. Feb 2016 20:28:05 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
Did you reset the reverses in the TX?

What do you mean with "all controls were wrong"? Diagnostic screen? Or not responding correctly to inputs?

I suggest to redo the setup from a clean situation, no reverses, correct CH2 and CH3, and go from there.

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
 Post subject: Re: wow 2.0
PostPosted: Tue 23. Feb 2016 20:41:27 
Offline

Joined: Mon 22. Jun 2015 5:50:05
Posts: 123
all inputs on diagnose sere right from trans. Justall on heli were wrong. throttle made rudder move, ect


Top
 Profile  
 
 Post subject: Re: wow 2.0
PostPosted: Tue 23. Feb 2016 20:44:48 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
john1127 wrote:
all inputs on diagnose sere right from trans. Justall on heli were wrong. throttle made rudder move, ect


Did you try saving the config, and rebooting the unit?

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
 Post subject: Re: wow 2.0
PostPosted: Tue 23. Feb 2016 21:11:17 
Offline

Joined: Mon 22. Jun 2015 5:50:05
Posts: 123
yes.


Top
 Profile  
 
 Post subject: Re: wow 2.0
PostPosted: Tue 23. Feb 2016 21:59:03 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
Channels assignments got lost, this could be the only explanation....

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
 Post subject: Re: wow 2.0
PostPosted: Wed 24. Feb 2016 0:50:33 
Offline

Joined: Mon 22. Jun 2015 5:50:05
Posts: 123
need more help from spirit. thks


Top
 Profile  
 
 Post subject: wow 2.0
PostPosted: Wed 24. Feb 2016 9:33:20 
Offline

Joined: Sat 02. Jan 2016 12:17:50
Posts: 183
john1127 wrote:
This one might be set out to soon. I upgraded 2 electric and all went well. Had to move 1&3 on one but that was all.
Then I went to my nitro and all went bad. Spent 2 hrs after update and eventully had to go back to 1.3. All controls were wrong, and I mean bad, tried swapping 1&3 no good. trex 600 dfc N.


I'd strongly recommend that you redo the setup. Reset the unit to defaults upgrade and start over with the wizard. Also reset all channel reversals on the transmitter.


Top
 Profile  
 
 Post subject: Re: wow 2.0
PostPosted: Wed 24. Feb 2016 9:35:31 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
jgiannakas wrote:
john1127 wrote:
This one might be set out to soon. I upgraded 2 electric and all went well. Had to move 1&3 on one but that was all.
Then I went to my nitro and all went bad. Spent 2 hrs after update and eventully had to go back to 1.3. All controls were wrong, and I mean bad, tried swapping 1&3 no good. trex 600 dfc N.


I'd strongly recommend that you redo the setup. Reset the unit to defaults upgrade and start over with the wizard. Also reset all channel reversals on the transmitter.


I see we are on the same page.

Unfortunately, if I read correctly his last post, the OP wants to hear from the Spirit guys only.

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
 Post subject: Re: wow 2.0
PostPosted: Wed 24. Feb 2016 9:36:58 
Offline

Joined: Sat 02. Jan 2016 12:17:50
Posts: 183
Coco66 wrote:
jgiannakas wrote:
john1127 wrote:
This one might be set out to soon. I upgraded 2 electric and all went well. Had to move 1&3 on one but that was all.
Then I went to my nitro and all went bad. Spent 2 hrs after update and eventully had to go back to 1.3. All controls were wrong, and I mean bad, tried swapping 1&3 no good. trex 600 dfc N.


I'd strongly recommend that you redo the setup. Reset the unit to defaults upgrade and start over with the wizard. Also reset all channel reversals on the transmitter.


I see we are on the same page.

Unfortunately, if I read correctly his last post, the OP wants to hear from the Spirit guys only.


+1. It just seems like an incorrect channel assignment that can be resolved in under 2 mins but to be on the safe side a clean start would be probably the best


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 39 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .