| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Cyclic Phase https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1190 |
Page 1 of 1 |
| Author: | Rcpassa [ Fri 19. Feb 2016 23:57:40 ] |
| Post subject: | Cyclic Phase |
What should this setting be for help with a 3 headed blade? 60? |
|
| Author: | ZeXx86 [ Sat 20. Feb 2016 0:05:55 ] |
| Post subject: | Re: Cyclic Phase |
For many multirotor heads cyclic phase is 0°, because phasing is done mechanically. So you have to check what your rotor head require to operate correctly. Manufacturer of the rotor head should tell you all the details. |
|
| Author: | Adrian [ Sat 20. Feb 2016 14:57:54 ] |
| Post subject: | Re: Cyclic Phase |
Have a look on my explanation to find right phase: viewtopic.php?p=13481#p13481 |
|
| Author: | Rcpassa [ Sun 21. Feb 2016 0:19:52 ] |
| Post subject: | Re: Cyclic Phase |
What would the cyclic phase setting need to be on a goblin 380 three bladed heli or a oxy3 Qube? |
|
| Author: | Coco66 [ Mon 22. Feb 2016 19:57:32 ] |
| Post subject: | Re: Cyclic Phase |
AFAIK, both manufacturers specify that to go from their two blades head to their three blades head the only needed change is to reduce the cyclic gain. |
|
| Author: | Rcpassa [ Mon 22. Feb 2016 22:04:54 ] |
| Post subject: | Re: Cyclic Phase |
it seems ambiguous with the spirit flybarless |
|
| Author: | Coco66 [ Mon 22. Feb 2016 22:11:24 ] |
| Post subject: | Re: Cyclic Phase |
Where did you see any ambiguos note? The FBL has nothing to do differently than with a two blades head, if everything has been done mechanically... why should Spirit be different? |
|
| Author: | Rcpassa [ Mon 22. Feb 2016 22:23:57 ] |
| Post subject: | Re: Cyclic Phase |
it ambiguous because tomas has mentioned that in some cases it doesn't need to be lowered with three blades... |
|
| Author: | ZeXx86 [ Mon 22. Feb 2016 22:37:24 ] |
| Post subject: | Re: Cyclic Phase |
Spirit has adaptive regulation that is able to tune itself to a certain degree. So this is reason, why it can fly well with the same cyclic gain. But generally you have to lower the gain. So everything is true. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|