| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Setting Spirit up with different RX (EX-Bus) https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1172 |
Page 1 of 1 |
| Author: | W.W. [ Fri 05. Feb 2016 15:12:23 ] |
| Post subject: | Setting Spirit up with different RX (EX-Bus) |
Hello, is it possible to set the Spirit up with a different RX (RSat or R9EX) than the RX, which will be used in the helicopter? Or do I have to redo the adjustments of the servo travel? I wan't to replace another FBL-System in my helicopter and want to play around with the Spirit and the Jeti Integration first, before flying. I think, with digital signals like SRXL/SUMD/UDI/EX-Bus the values shouldn't Change with a different receiver. I will go through the settings anyway but want to know whether I shold invest the time in adjusting servo travel ... precise when playing around or if I should save the time and do this in the model. best regards Wolfgang |
|
| Author: | ZeXx86 [ Fri 05. Feb 2016 15:31:45 ] |
| Post subject: | Re: Setting Spirit up with different RX (EX-Bus) |
Hello, If you are changing receiver, but used protocol (for example EX Bus) is same, then everything should be same. So you do not have to reconfigure anything. |
|
| Author: | W.W. [ Fri 05. Feb 2016 15:54:26 ] |
| Post subject: | Re: Setting Spirit up with different RX (EX-Bus) |
many thanks, great support and fast answers here! |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|