| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| DX8 to DX9 gyro calibration https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1097 |
Page 1 of 1 |
| Author: | Alyon187 [ Sun 13. Dec 2015 5:56:43 ] |
| Post subject: | DX8 to DX9 gyro calibration |
I recently got a dx9 as a upgrade from my dx8 and ive got it all binded to my g380 fine and working properly with very little adjustments. Switching the radios on the heli was surprisingly very easy but I came across an issue w the gyro channel. I cant seem to get it to match w what my tx reads. On the diagnosis page they will start out reading the same but the higher I get, say around 20 they start to differ by one or two points. By the time I get to my desired gain, the difference is like 20. My tx will read like 87 or so and the diagnosis page reads at 76ish. What can I do to fix this? |
|
| Author: | djhandz [ Sun 13. Dec 2015 6:24:07 ] |
| Post subject: | Re: DX8 to DX9 gyro calibration |
Adjust your travel end points for gyro till you get a 1 to 1 ratio thats what i did with my dx9. So a value of 60 gyro gain in tx will give me 60 in diagnostics page |
|
| Author: | Alyon187 [ Sun 13. Dec 2015 6:28:08 ] |
| Post subject: | Re: DX8 to DX9 gyro calibration |
How could you do that through the diagnosis page without having to adjust the gyro gain seperately then going back to the diagnosis page to see if it worked or not? |
|
| Author: | Alyon187 [ Sun 13. Dec 2015 6:56:07 ] |
| Post subject: | Re: DX8 to DX9 gyro calibration |
Ah, ok I got what you ment. I went back and did it that way and was able to get it to a ratio of 1:1. Everything checks out now. Thanks! |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|