| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| My spirit pro is dead after upgrade to 1.3.2 https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1092 |
Page 1 of 3 |
| Author: | dimisx1 [ Sat 12. Dec 2015 4:21:19 ] |
| Post subject: | My spirit pro is dead after upgrade to 1.3.2 |
The unit is completely unresponsive no red lights no nothing all I did was to upgrade to 1.3.2 the system said upgrade successful please restart but the unit is not working any more. Please help |
|
| Author: | dimisx1 [ Sat 12. Dec 2015 9:43:49 ] |
| Post subject: | Re: My spirit pro is dead after upgrade to 1.3.2 |
I am using win 10 and I have installed the usb drivers. Now it flashes red one for a short while and then nothing. I have tried the recovery mode as you it was said in a previous post but the process of update doesn't start. Please help as I really want to fly tom.!! |
|
| Author: | ZeXx86 [ Sat 12. Dec 2015 11:01:49 ] |
| Post subject: | Re: My spirit pro is dead after upgrade to 1.3.2 |
If there is a short blink, then the fix can be very easy and you can proceed in this way: 1. start the software, during question for Demo mode select No 2. select the firmware (1.3.2) and click the Flash button 3. connect power to the unit, flashing should start immediately. It is important to install drivers that are bundled with our software, because drivers from OS can do the problem. |
|
| Author: | dimisx1 [ Sat 12. Dec 2015 11:48:39 ] |
| Post subject: | Re: My spirit pro is dead after upgrade to 1.3.2 |
I did that but nothing is happening! The application is freezing and not responding |
|
| Author: | ZeXx86 [ Sat 12. Dec 2015 11:56:10 ] |
| Post subject: | Re: My spirit pro is dead after upgrade to 1.3.2 |
Do you see Recovery mode after pressing the Flash button? Try to plug battery immediately after pressung the button. If the process is done properly, it will work for sure. |
|
| Author: | dimisx1 [ Sat 12. Dec 2015 12:04:16 ] |
| Post subject: | Re: My spirit pro is dead after upgrade to 1.3.2 |
Yes I see recovery mode but the process doesn't starts |
|
| Author: | ZeXx86 [ Sat 12. Dec 2015 12:11:21 ] |
| Post subject: | Re: My spirit pro is dead after upgrade to 1.3.2 |
You have to only plug the USB cable to the SYS port. Then after clicking the Flash button, battery/BEC should be connected. At this moment, LED on the unit should blink for very short time and flashing should start too. It is very important to connect the power supply AFTER pressing the Flash button. Can you see more COM ports in the Connection tab? |
|
| Author: | dimisx1 [ Sat 12. Dec 2015 12:46:48 ] |
| Post subject: | Re: My spirit pro is dead after upgrade to 1.3.2 |
I think I found the source of the problem the extension of the file is .man! So a wrong file was installed! What next?? |
|
| Author: | ZeXx86 [ Sat 12. Dec 2015 12:51:00 ] |
| Post subject: | Re: My spirit pro is dead after upgrade to 1.3.2 |
Problem with "MAN" file is probably caused by Internet Explorer where is a bug. Other web browsers are downloading file without any problem. First you have to download file with extension "4df" - if you have different web browser it should be OK when you click here: http://spirit-system.com/dl/fw/spirit-fw-1.3.2.4df |
|
| Author: | dimisx1 [ Sat 12. Dec 2015 13:05:07 ] |
| Post subject: | Re: My spirit pro is dead after upgrade to 1.3.2 |
Still not working! Yes I can see COM1 but the process doesn't initiate! |
|
| Page 1 of 3 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|