|
It is currently Sat 23. Nov 2024 8:17:17
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 9 posts ] |
|
| Author |
Message |
|
btheli
|
 Posted: Fri 11. Dec 2015 4:19:12 |
|
Joined: Fri 26. Sep 2014 20:08:26
Posts: 86
|
|
I'm giving 1.3.2 another try on my Gaui X3. The main gear has 131T and I have a 10T pinion, so the gear ratio is 13.1. The software will only go as high as 12.7. What should I do?
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Fri 11. Dec 2015 8:37:22 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
The best way is to use 11T pinion, because gear ratio is very high and power system can be inefficient.
There is also way to set sensor divider differently, but I have to know what is your value.
_________________
Spirit System developer
|
|
| Top |
|
|
|
btheli
|
Posted: Fri 11. Dec 2015 13:26:43 |
|
Joined: Fri 26. Sep 2014 20:08:26
Posts: 86
|
|
10p motor so sensor divider is 5.
Sent from my phone using Tapatalk
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Fri 11. Dec 2015 15:08:25 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
You can set
Sensor divider to 6
Gear Ratio to 10,9
Then the result should be same as with 5 and 13.1.
The values are used only for RPM calculation, both are multiplied.
6 * 10,9 = 65,4
5 * 13,1 = 65,5
The difference could be max. 4 RPM which is under resolution of the sensor.
_________________
Spirit System developer
|
|
| Top |
|
|
|
elfew
|
Posted: Fri 11. Dec 2015 15:09:41 |
|
Joined: Sun 25. Aug 2013 9:14:16
Posts: 226
|
|
Ok, anyway this is a little bit tricky way. It should be supported by spirit itself without this recalculation
_________________
DX9 - Chase 360 - Spirit
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Fri 11. Dec 2015 15:22:08 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Gear Ratio higher than 12 is very atypic and shouldn't be used from our point of view.
Same limit is also in other FBL systems, for example V-Bar.
We will check what is the best solution for this issue.
_________________
Spirit System developer
|
|
| Top |
|
|
|
btheli
|
Posted: Fri 11. Dec 2015 15:32:04 |
|
Joined: Fri 26. Sep 2014 20:08:26
Posts: 86
|
|
Thanks. I'm in this situation because I picked up a fairly high kv motor (1860) for my Gaui X3, which is well-suited for running higher head speeds. The heli is very snappy indeed, but my flight times also dropped significantly. I may replace the motor with a lower kv, but I thought I would first see how it ran with a 10T pinion instead of the 11T. Thanks again for your help.
|
|
| Top |
|
|
|
elfew
|
Posted: Fri 11. Dec 2015 23:25:46 |
|
Joined: Sun 25. Aug 2013 9:14:16
Posts: 226
|
|
Zexx, I agree of course, but the way you wrote seems to me really "hacky". I just recommend to leave this on users choise...it is their fly style and it is only up to them which gear ratio use
_________________
DX9 - Chase 360 - Spirit
|
|
| Top |
|
|
|
elfew
|
Posted: Fri 11. Dec 2015 23:34:02 |
|
Joined: Sun 25. Aug 2013 9:14:16
Posts: 226
|
|
Anyway I understand that this limit can avoid problems with spirit governor in some circumstances.
I like the way in CC esc. There is a recommended setting displayed for the set gear ratio. Maybe something like icon with different colors in spirit setting tab next to the rpm would be nice.
Red color - gov out of range
Yellow - at the edge or something like this
Green - within range, gov should work correctly
_________________
DX9 - Chase 360 - Spirit
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 9 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 40 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
