| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Servo moving https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1075 |
Page 1 of 1 |
| Author: | Emillion [ Sat 05. Dec 2015 17:53:13 ] |
| Post subject: | Servo moving |
Hi, after a while, while on the bench, the 3 swash servos start moving (kind of shaking) without any input, the movements are fast and stop after two or three seconds. The helicopter is not being moved, the servos move rapidly (similar like when holding the FBL unit in the hand), but only after a some time (it can be 1 min, or 45 seconds, 1 and a half minute or...) I've tried to flash the unit but it doesn't help. What is the problem, thank you. |
|
| Author: | ajbwn [ Sat 05. Dec 2015 20:59:04 ] |
| Post subject: | Re: Servo moving |
Hi im no expert but as a thought have you checked the servo frequency is correct. Alan |
|
| Author: | ZeXx86 [ Sat 05. Dec 2015 23:32:09 ] |
| Post subject: | Re: Servo moving |
We are already in contact by email - Emil contacted me in more ways. We will post solution here. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|