| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| lose pitch movement when banks programmed https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1073 |
Page 1 of 1 |
| Author: | Angus [ Sat 05. Dec 2015 2:33:31 ] |
| Post subject: | lose pitch movement when banks programmed |
OK going to try and explain this: downloaded latest firmware, reset to factory default, use the wizard to program goblin 500, everything goes well all movements are good. Now I need to program rescue and stabilization, I have 3 position switch working on channel 7 and shows movement in diagnostics. I have switch at position 1 and activate Bank 0 with rescue, then I move switch to middle position and activate bank 1 with the same rescue, then I move the switch to position 3 and activate bank 2 with stabilization. all have been saved, when I have the radio switch in position 1 or 2(middle ) for rescue mode (bank 0 and 1) I have no pitch movement in bank 2 (stabilization) I have pitch movement for the life of me and my buddy we can not figure it out. any help on what we are doing wrong would be appreciated Angus |
|
| Author: | Angus [ Sat 05. Dec 2015 3:58:45 ] |
| Post subject: | Re: lose pitch movement when banks programmed |
figured it out, gyro was reversed |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|