| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Spirit Unit won't respond after 1.30 firmware flash [Solved] https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=1052 |
Page 1 of 1 |
| Author: | Jamisonchang [ Mon 23. Nov 2015 3:13:42 ] |
| Post subject: | Spirit Unit won't respond after 1.30 firmware flash [Solved] |
Hello, I see others have had this issue but I can't find the solution on line. I flashed from 1.20 to 1.3 so that I could use my BT module with my android ( which has 1.30 software). Now, the LED on the FBL unit won't light at all. Windows 7 is what I used to flash the drive with 1.30. Please help |
|
| Author: | ZeXx86 [ Mon 23. Nov 2015 8:29:59 ] |
| Post subject: | Re: Spirit Unit won't respond after 1.30 firmware flash |
Hello, can you please check this thread? viewtopic.php?f=20&t=1040 If LED is not blinking during battery connection, then I will send the guide so you can fix the problem. |
|
| Author: | Jamisonchang [ Mon 23. Nov 2015 12:28:48 ] |
| Post subject: | Re: Spirit Unit won't respond after 1.30 firmware flash |
The LED is always off, I can't see it light up at all. Please send me directions/guide as you stated in previous post or let me know what else to try Thanks |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|