Spirit System • View topic - problem with electronic gov, not spooling up above 49% thr

It is currently Sat 23. Nov 2024 11:51:10

View unanswered posts | View active topics

Board index » English » HELI » Support

All times are UTC + 1 hour

problem with electronic gov, not spooling up above 49% thr

Page 9 of 10

[ 98 posts ]

Go to page Previous 1 ... 6, 7, 8, 9, 10 Next

Print view

Previous topic | Next topic

Author

Message

velocity90

Post subject: Re: problem with electronic gov, not spooling up above 49% t

Posted: Sun 13. Mar 2016 1:48:27

Joined: Sun 26. Oct 2014 9:53:53
Posts: 252

ZeXx86 wrote:

I am sure it is something in the transmitter settings or transmission of the data as you are only one affected by the issue.
Did you tried default transmitter settings as recommended?

S-Bus inverter should never be used with the Spirit Pro. It is already integrated there.

Yes, made a brand new model just like you asked. Sorry but there's nothing wrong with my transmitter (14sg) and this May never happen.

I measured everything, its perfectly transmitting the requested thr output only.

I was revering to the build in sbus inverter.

Are you sure your test machines with yge don't use yges build in softstart?

_________________
[b]-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro

Top

velocity90

Post subject: Re: problem with electronic gov, not spooling up above 49% t

Posted: Sun 13. Mar 2016 3:41:38

Joined: Sun 26. Oct 2014 9:53:53
Posts: 252

Adrian wrote:

I can reproduce the behavior with my DX9 setup. If I change in TX Speed for throttle from NORMAL to 0.1, I got exactly the same effect, but on every spool-up.
Normal: OFF 900us release Hold: 1100us ramp up to 1900us as it should be with 200us jump
With Speed 0.1: OFF 900us release Hold: 1300us ramp up to 1900us with 400us jump
As I speculated on previous post, Spirit sees TC for a very short time somewhere around 40% and starts ramp-up from there, as this looks like intend idle TC power.

Question is now, why does this happen from Radio Side in your setup and why only on first spool-up. Is there any parameter in your radio influencing TC speed?
How can this be avoided on Radio setup or within Spirit? (TC Input Filter, if GOV in Spirit engaged)

Servo speed I think is this option for futaba? All at zero by default.

_________________
[b]-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro

Top

velocity90

Post subject: Re: problem with electronic gov, not spooling up above 49% t

Posted: Sun 13. Mar 2016 9:01:20

Joined: Sun 26. Oct 2014 9:53:53
Posts: 252

Found out something! If I start the receiver and spoolup, than connect the Spirit, gov spoolup makes no jump!

The receiver is doing something the first time it spools up but its not measurable. Ch3 behaves normal so something with the sbus signal? Scares me that something like this can trigger a bailout.

_________________
[b]-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro

Top

Adrian

Post subject: Re: problem with electronic gov, not spooling up above 49% t

Posted: Sun 13. Mar 2016 11:13:29

Joined: Thu 08. Oct 2015 14:43:12
Posts: 204
Location: Switzerland

this helps, just to confirm:
1. You powered up system, with sbus disconnected?
2. You did a Hold release and back to Hold
3. You connected sbus
4. You did a Hold release, where spoolup went slow as expected.

Which means for the 2nd spoolup, from spirit point of view, it was it's first spoolup, from Receiver point of view it was it's 2nd spoolup.
As I understand, this got observed with sbus disconnection, can you test this with Power up or vis versa?

1. Power up only Receiver
2. Hold release wait and Hold
3. Power up Spirit, Radio kept on power
4. Hold release ramp-up observation.

_________________
Oxy4max SpiritPro + HW // SOXOS 550, SpiritPro, HW120A V4, 920KV // SOXOS 600, SpiritPro, HW160A, Pyro650 // SOXOS Strike7, SpiritPro, HW160A, Pyro750 // Skywing Spirit Aero // FrSky Horus X10S + Taranis X7 /

Top

velocity90

Post subject: Re: problem with electronic gov, not spooling up above 49% t

Posted: Sun 13. Mar 2016 11:28:07

Joined: Sun 26. Oct 2014 9:53:53
Posts: 252

I did powerup the receiver, hold release, hold on, connect spirit. Than spoolup is ok. Something is happening that the Spirit doesn't like, but vbar and my yge don't have trouble with at all. Could it be some sort of signal for sbus servos?

_________________
[b]-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro

Top

Adrian

Post subject: Re: problem with electronic gov, not spooling up above 49% t

Posted: Sun 13. Mar 2016 13:19:29

Joined: Thu 08. Oct 2015 14:43:12
Posts: 204
Location: Switzerland

Q1) What type of receiver are you using?
Q2) With connect Spirit, you did sbus disconnect and connect, right? Your not talking about connecting power.
Q3) Do you agree, based on what we have got now, sbus signal looks different from receiver towards Spirit from 1st hold release to subsequent hold releases.

Which means, challenge is on receiver side and not Spirit side. However, as you got kind of standard setup, this strange receiver behavior should and could only be addressed in Spirit.
Based on what I see now, I think your receiver is sending out of 1st Hold somewhere a 1400us puls instead of only 1820us (TC 90%) pulses, which causes the Spirit to start ramp from there.

Top

velocity90

Post subject: Re: problem with electronic gov, not spooling up above 49% t

Posted: Sun 13. Mar 2016 13:58:28

Joined: Sun 26. Oct 2014 9:53:53
Posts: 252

It's sending out what ever the thr curve is. This I can measure easily. And yes, during 2nd spoolup something is different. R6108sb sbus receiver.

Whatever it sends its not a measurable weird pulse. It shows exactly what I have set for thr curve on my pulse monitor. And its a very sensitive one.

_________________
[b]-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro

Top

ZeXx86

Post subject: Re: problem with electronic gov, not spooling up above 49% t

Posted: Sun 13. Mar 2016 16:34:59

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

I am convinced that your transmitter and receiver is OK, there is only something weird in the current settings.
For sure we will find it soon.

You can also try if there is any change when you are switching between 12CH, 14CH, MULT in your transmitter.
12CH should be the fastest transmission.

_________________
Spirit System developer

Top

velocity90

Post subject: Re: problem with electronic gov, not spooling up above 49% t

Posted: Sun 13. Mar 2016 18:02:24

Joined: Sun 26. Oct 2014 9:53:53
Posts: 252

ZeXx86 wrote:

Its a 6106sb which supports mult, not an fasstest receiver.

_________________
[b]-TT E700 V2-Spirit Pro-mks950-980-Kontronik Kosmik 160 HV -Pyro 700 rewound by PD / Voodoo 600 -PD-MX700-470kv--BLS255hv-VBAR 5.3+- Gaui X3+ Spirit Pro

Top

ZeXx86

Post subject: Re: problem with electronic gov, not spooling up above 49% t

Posted: Sun 13. Mar 2016 20:23:00

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

It should support all mentioned modulations. Fasstest is a different thing (alternative to Fasst, FHSS, etc).
It is very easy to change it in the transmitter (just in a few seconds).

_________________
Spirit System developer

Top

Page 9 of 10

[ 98 posts ]

Go to page Previous 1 ... 6, 7, 8, 9, 10 Next

Board index » English » HELI » Support

All times are UTC + 1 hour

Who is online

Users browsing this forum: No registered users and 49 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: