Spirit System • View topic - Does the Spirit Pro have inbuilt regulator

It is currently Sun 24. Nov 2024 19:26:29

View unanswered posts | View active topics

Board index » English » HELI » Support

All times are UTC + 1 hour

Does the Spirit Pro have inbuilt regulator

Page 1 of 2

[ 11 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

Moby58

Post subject: Does the Spirit Pro have inbuilt regulator

Posted: Tue 21. Apr 2020 6:49:34

Joined: Sun 07. Apr 2019 14:55:19
Posts: 7
Location: Perth, Australia

Hi Guys,
The Spirit Pro can have an input up to 15v on AUX1.
Is this regulated down to 5v or 6v before going to the servos?
Or is it just passed thru untouched?

_________________
Regards

Moby
Upside down, down under in Oz

Top

10x

Post subject: Re: Does the Spirit Pro have inbuilt regulator

Posted: Tue 21. Apr 2020 6:53:07

Joined: Wed 04. Jul 2018 18:03:55
Posts: 180

The input is on the same bus as the servo's, so 12v in, 12v out...

Top

Moby58

Post subject: Re: Does the Spirit Pro have inbuilt regulator

Posted: Tue 21. Apr 2020 6:54:16

Joined: Sun 07. Apr 2019 14:55:19
Posts: 7
Location: Perth, Australia

10x wrote:

The input is on the same bus as the servo's, so 12v in, 12v out...

ok, thanks for that :-)

_________________
Regards

Moby
Upside down, down under in Oz

Top

ZeXx86

Post subject: Re: Does the Spirit Pro have inbuilt regulator

Posted: Tue 21. Apr 2020 7:11:45

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442

It has built-in regulator, but not for the servos.

_________________
Spirit System developer

Top

Moby58

Post subject: Re: Does the Spirit Pro have inbuilt regulator

Posted: Tue 21. Apr 2020 15:37:02

Joined: Sun 07. Apr 2019 14:55:19
Posts: 7
Location: Perth, Australia

ZeXx86 wrote:

It has built-in regulator, but not for the servos.

Thats a bummer

_________________
Regards

Moby
Upside down, down under in Oz

Top

urgno

Post subject: Re: Does the Spirit Pro have inbuilt regulator

Posted: Tue 21. Apr 2020 18:44:50

Joined: Tue 21. Aug 2018 13:05:23
Posts: 274

Moby58 wrote:

Thats a bummer

that's not a bummer, is a flybarless
what you are looking for is called BEC/SBEC/UBEC :-)

Top

Moby58

Post subject: Re: Does the Spirit Pro have inbuilt regulator

Posted: Wed 22. Apr 2020 4:29:33

Joined: Sun 07. Apr 2019 14:55:19
Posts: 7
Location: Perth, Australia

urgno wrote:

Moby58 wrote:

Thats a bummer

that's not a bummer, is a flybarless
what you are looking for is called BEC/SBEC/UBEC :-)

What I mean no point having a 15v input if it is just going to burn out the servos

_________________
Regards

Moby
Upside down, down under in Oz

Top

thestructured

Post subject: Re: Does the Spirit Pro have inbuilt regulator

Posted: Wed 22. Apr 2020 6:44:49

Joined: Thu 24. Dec 2015 20:13:20
Posts: 157

At least it won't burn the unit at the same time :lol:

Top

HeliMLM

Post subject: Re: Does the Spirit Pro have inbuilt regulator

Posted: Wed 22. Apr 2020 7:53:42

Joined: Tue 10. Mar 2020 14:36:22
Posts: 370

there are good tests out there regarding reverse current generated by servos... induction voltage being up to almost 15v... so good to be safe on Spirit side. the unit is protected of being damaged (less likely - short peaks only) but most important: protected of malfunction (crash/reboot in flight?) as it is proof against peaks of up to 15v. brownouts / malfunction due to reverse current is a well documented problem...

... and maybe some day in the future we will see shv-servos (Super HV)... i.e. 12V or even 15V

great to be prepared!

_________________
cheers
Michael

Top

Kluftinger

Post subject: Re: Does the Spirit Pro have inbuilt regulator

Posted: Thu 23. Apr 2020 8:01:55

Joined: Tue 25. Jul 2017 20:33:40
Posts: 101
Location: Southern Bavaria

What would be the advantage of a HV Power supply for a Spirit unit with 6V Servos connected to it, protected by a regulator?

For scale helicopter I need to configure my system the other way around.
I'm using 8.4V HV Servos for swash plate and tail rotor, but for a retractable landing gear I want to use 6V standard servos.
A Y-connetor and a BEC takes care of the 6V servos in an extra voltage branch.

Top

Page 1 of 2

[ 11 posts ]

Go to page 1, 2 Next

Board index » English » HELI » Support

All times are UTC + 1 hour

Who is online

Users browsing this forum: No registered users and 63 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: