ZeXx86 wrote:
If you want to switch between conventional flight, stabilisation and rescue (with only one switch on your TX), you can do so with unassigned Gyro channel, so you can configure Gyro Gain (in the software - Sensor Tab) to negative positions for Bank 1 and 2, but for Bank 0 it will be positive.
So activation will be performed with Bank switching only, but Gyro Gain will be configured in the software.
There is also the possibility to switch the GyroGain to negative by using a mixer on the same switch used for the banks. I have done so - it is working great.
Gesendet von meinem GT-I9515 mit Tapatalk
