|
It is currently Sun 24. Nov 2024 10:57:06
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 3 posts ] |
|
| Author |
Message |
|
Duckman
|
 Posted: Tue 27. Feb 2024 11:55:07 |
|
Joined: Tue 27. Feb 2024 11:46:52
Posts: 1
|
|
Hi
Just at take off head speed the tail rotates quicly to the right in a full circle. The servo direction is OK and the blades move smoothly. Any ideas of what the problem is?
|
|
| Top |
|
 |
|
senaka
|
Posted: Mon 04. Mar 2024 11:32:04 |
|
Joined: Wed 10. May 2023 9:36:53
Posts: 37
Location: The Netherlands
|
|
Could be in the config although moving the TX sticks commands the correct throw direction, the spirit may have this direction reversed somewhere in the settings?
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Mon 04. Mar 2024 11:36:10 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
It could be also wrong Mounting Position configuration.
Servo must compensate in the correct direction otherwise model will yaw everytime during lift off.
You can check it without main blades when you will set low RPM and carefully change position.
If it will not try to hold then General/Mounting position was set to incorrect one.
It is better to hold tail boom very firmly and carefully. Very low RPM are enough to check this.
_________________
Spirit System developer
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 3 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 61 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
