HI all
New user of Spirit GTR and Geolink and in process of setting up my Goblin RAW 420.

My question relates to the telemetry settings. I have a Hobbywing V4 installed and wired such that i get RPM back on my Jeti DC24.
in the telemetry section of spirit settings app, what do i enter for Gear Ratio?
My RAW 420 uses a direct drive motor.

The pole count is 42, so i need to enter 21 in sensing divider ( poles /2 ) correct?

Thanks in advance.

Hello,
thats not very hard - you have Direct Drive gear ratio is "1" -
Sensing divider is 21 as you said -
Regards !

Thank you, i was hoping that was correct.
bear in mind this is the first time ive built a heli kit. and the first time ive set up the geometry. also first time to program a FBR .
So a lot of firsts for me.
ive been on a journey and a steep learning curve so im just making sure im doing it right. this was a project i fancied taking on to challenge myself and keep current.

hobbywing 60A v4 Esc, and ive a geolink up top.

wish me luck with the test flight.

Hello,
no problem, we all have setted up an FBL and heli at the first time - If you make your settings slowly and carefully then all will work - no worries !

Good luck !