It is currently Fri 22. Nov 2024 13:13:04

All times are UTC + 1 hour





Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
 Post subject: Re: oscillating tail
PostPosted: Sat 01. Jul 2023 20:43:40 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 111
Location: Germany
Hi,

wow, increasing the frequency to 150 Hz improved behavior at least on the bench significantly. Now I can see the influence of changing gyro gain again and I feel more comfortable again with tuning know parameters. Tomorrow I will try to fine tune outside.

Thank you very much for your help!

Regards,
Alexander


Top
 Profile  
 
 Post subject: Re: oscillating tail
PostPosted: Thu 06. Jul 2023 20:17:41 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 111
Location: Germany
Hi,

I am sad to report that I am still not able to get the heli into the air without that hard oscillating tail. Shortly before lifting off it starts regardless what parameters are tuned. I even set the servo frequency up to 333 Hz.
Holding the heli in my hand I mostly can force the oscillation to start by turning it a little bit to the side with a fast move and can also sometimes stop it for a short moment doing the same again. This happens regardsless to what side I turn the heli.

I ran absolutely out of any idea now...

Regards,
Alexander


Top
 Profile  
 
 Post subject: Re: oscillating tail
PostPosted: Thu 06. Jul 2023 20:24:06 
Offline
User avatar

Joined: Sun 09. Jun 2013 13:14:17
Posts: 997
Location: Plzeň
put the settings from the unit here, maybe we can figure something out

_________________
Spirit System (Spirit W1, RS & GTR & all the others)
Spirit Wave & JETI DS 12
http://www.habada.cz


Top
 Profile  
 
 Post subject: Re: oscillating tail
PostPosted: Thu 06. Jul 2023 20:31:28 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 111
Location: Germany
Hi,

here you go:
Attachment:
cHP120B.4ds [255 Bytes]
Downloaded 33 times


Regards,
Alexander


Top
 Profile  
 
 Post subject: Re: oscillating tail
PostPosted: Thu 06. Jul 2023 20:41:57 
Offline
User avatar

Joined: Sun 09. Jun 2013 13:14:17
Posts: 997
Location: Plzeň
I don't see anything wrong with the setting, maybe the direction of the collective is reversed, why?
Please send me a photo of the helicopter, just a few, as well as details

_________________
Spirit System (Spirit W1, RS & GTR & all the others)
Spirit Wave & JETI DS 12
http://www.habada.cz


Top
 Profile  
 
 Post subject: Re: oscillating tail
PostPosted: Thu 06. Jul 2023 21:09:12 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 111
Location: Germany
Attachment:
IMG_20230706_215145.jpg
IMG_20230706_215145.jpg [ 2.82 MiB | Viewed 346 times ]

Attachment:
IMG_20230706_215220.jpg
IMG_20230706_215220.jpg [ 4.8 MiB | Viewed 346 times ]

Attachment:
IMG_20230706_215313.jpg
IMG_20230706_215313.jpg [ 4.31 MiB | Viewed 346 times ]


Top
 Profile  
 
 Post subject: Re: oscillating tail
PostPosted: Thu 06. Jul 2023 21:10:05 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 111
Location: Germany
Attachment:
IMG_20230706_215515.jpg
IMG_20230706_215515.jpg [ 4.22 MiB | Viewed 346 times ]

Attachment:
IMG_20230706_215527.jpg
IMG_20230706_215527.jpg [ 3.71 MiB | Viewed 346 times ]


Top
 Profile  
 
 Post subject: Re: oscillating tail
PostPosted: Thu 06. Jul 2023 21:17:48 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 111
Location: Germany
Hi,

all stearing on the bench, as well as reaction to tilting and turning lead to a correct reaction of the heli - and of course the stick movements are matching the displayed system's outputs.

Regards,
Alexander


Top
 Profile  
 
 Post subject: Re: oscillating tail
PostPosted: Wed 12. Jul 2023 9:46:07 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 111
Location: Germany
Hi,

no further suggestion?

Regards,
Alexander


Top
 Profile  
 
 Post subject: Re: oscillating tail
PostPosted: Wed 12. Jul 2023 9:57:30 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
There can be multiple reasons for this behavior, unfortunately it is hard to guess.
For example it could be motor or ESC interference with tail servo or Spirit unit.
Unfortunately components that are used on these small helicopters are usually of low quality. So anything can be reason for this behavior.
I recommend to observe tail servo and check if it has relation with headspeed.
If tail will start to oscillate always even with very low RPM then it is not caused by vibrations for sure but some kind of interference.
It could be also some mechanical issue at tail. I dont know if there were some changes or crash when it was working with other system.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 42 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .