I have an new Spirit RS Unit with Geo Link on my new SAB Goblin Kraken 700 Helicopter.

Setup:Servo GDW 3x 992, 1x 995
ESC YGE aureus 135 HVT BEC
Motor Xn 4525 Lightning 530
1st Buffer Pack 3x25F
Spirit RS with Geo Link
Transmitter Jeti DS24 Carbon
Pitch -13/+13
RMP 1730


I build the Helicopter, and made the setting with the Transmitter. I have a switch for Rescue normal function, a switch for Altitude limit ( configuration:(6m and 250m, Rescue normal).
I have several Problems:
During first flight I wanted to do the Advanced and Expert settings. I opend spirit setup in the transmitter dünngesäte flight“. Altitude limit was activated activated Sitz the switch, but, The Rescuemode was activated although altitude was about 20m). It did not work.
Then I tested the rescue normal function in back altitude, the rescue function was so hard(factory setting) that the mail blades touches the tail and damaged it.

So in mounted a new tail.

Next problem. After every take off when hovering there is a short up and down movement from the tail.
Here ist a link to a Video of the Tail movement After Takeoff:

https://we.tl/t-CV0gRoyqGR

Thank You

Stefan

Hello,

were you able to find the problem after our email conversation?

_________________
Spirit System developer

Tomas looks this was a Fake publicity message, because if you click on the LInk it appears a Private
Bank !!

The link was working previously. We were on contact by email resolving the same things.

_________________
Spirit System developer