|
It is currently Sat 23. Nov 2024 22:26:24
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 2 posts ] |
|
| Author |
Message |
|
Clinton
|
 Posted: Thu 24. Nov 2016 16:21:31 |
|
Joined: Wed 24. Aug 2016 11:46:57
Posts: 2
|
|
Hi guys. I've got my first pro which I am going to install on a logo 600. I'm using the ar9020 srxl connection . I have two leads coming from the kontronic esc for power. One goes to the throttle on receiver. Do I put both in receiver or one to the fbl unit. Or both to the fbl unit.I will be using the kontronic governor. Thanks in advance
|
|
| Top |
|
 |
|
ZeXx86
|
Posted: Thu 24. Nov 2016 21:38:33 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Hi Clinton!
All the combinations that you have mentioned will work.
But to avoid ground loops, the best way is to connect throttle directly to the unit and second lead of the BEC too.
So AUX1 and AUX2 will be for throttle input and powering.
Receiver can be connected just with a single cable as it require very small current.
Alternatively you can connect BEC and throttle to the receiver and use two cables connected to the unit.
_________________
Spirit System developer
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 2 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 50 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
