|
It is currently Sat 23. Nov 2024 3:40:22
|
View unanswered posts | View active topics
 
|
Page 1 of 1
|
[ 10 posts ] |
|
| Author |
Message |
|
nzflyer
|
 Posted: Mon 26. Oct 2015 7:02:25 |
|
Joined: Sun 04. Oct 2015 9:55:42
Posts: 33
Location: Christchurch New Zealand
|
|
Hi still having a tail wag. But it only wags when i start to pitch up. Doesn't matter if it is hard or soft pitch up. I have tried most things,
Rudder delay is in zero. Pitch consistency is 170. I have tried rudder delay higer with no luck. Using a kds 690tail servo brushless.
Speed: 0.039sec/60°@8.4V
Sent from my iPad using Tapatalk
Last edited by nzflyer on Wed 28. Oct 2015 11:13:58, edited 1 time in total.
|
|
| Top |
|
 |
|
Gtamas
|
Posted: Mon 26. Oct 2015 14:53:15 |
|
Joined: Tue 17. Mar 2015 22:07:02
Posts: 107
|
|
HI!
On trex 700 with RJX tail servo with 0,03 sec/60 i had the same issue. Try piro consistency 190-200. your tail servo is fast enough. You may need to decrease the tail gain a bit to do this. if the issue is still there, then the gov gain is very high. i have my governor gain with align 750MX castle 120A at 6 or 7. rpm is 1950.
And bump the tail refres rate to the max your servo is capable. ( mine is 1520us 333hz, and the holding is good)
|
|
| Top |
|
|
|
icare
|
Posted: Mon 26. Oct 2015 16:18:57 |
|
Joined: Sun 14. Jun 2015 7:35:03
Posts: 35
|
|
Rjx standard tail servo frequency is 760 µs 333hz
_________________
Logo 600 sx spirit, Diabolo 700 spirit pro, Jeti DS 14.
France.
|
|
| Top |
|
|
|
Gtamas
|
Posted: Mon 26. Oct 2015 21:30:35 |
|
Joined: Tue 17. Mar 2015 22:07:02
Posts: 107
|
|
yes, there is a typo, cyclics are 1520 333hz, tail is 760 333hz. In this case this is irrelevant.
|
|
| Top |
|
|
|
nzflyer
|
Posted: Tue 27. Oct 2015 1:13:57 |
|
Joined: Sun 04. Oct 2015 9:55:42
Posts: 33
Location: Christchurch New Zealand
|
|
Spec for tail servo say 720us 560hz, shall i try 333hz
Sent from my iPad using Tapatalk
|
|
| Top |
|
|
|
nzflyer
|
Posted: Tue 27. Oct 2015 1:14:32 |
|
Joined: Sun 04. Oct 2015 9:55:42
Posts: 33
Location: Christchurch New Zealand
|
|
Typo 760us
Sent from my iPad using Tapatalk
|
|
| Top |
|
|
|
Gtamas
|
Posted: Tue 27. Oct 2015 10:34:09 |
|
Joined: Tue 17. Mar 2015 22:07:02
Posts: 107
|
|
No, leave it at 560hz, but try to increase the piro consistency, it's the "I" gain in other systems, it is also known as heading hold gain.
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Tue 27. Oct 2015 11:58:40 |
|
 |
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Hi,
can you tell me how you have configured mechanical tail center position?
Can you share your settings, please? You can attach 4DS file here.
_________________
Spirit System developer
|
|
| Top |
|
|
|
nzflyer
|
Posted: Wed 28. Oct 2015 11:15:43 |
|
Joined: Sun 04. Oct 2015 9:55:42
Posts: 33
Location: Christchurch New Zealand
|
|
Have solved the problem i think. Gov gain was to high. Will do some more testing in next couple of days.
Thanks people for ya input
Sent from my iPad using Tapatalk
|
|
| Top |
|
|
|
ZeXx86
|
Posted: Fri 30. Oct 2015 8:19:56 |
|
|
| Site Admin |
Joined: Mon 29. Apr 2013 16:06:44
Posts: 12442
|
|
Perfect, thank you very much for the info!
_________________
Spirit System developer
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 10 posts ] |
|
 |
Who is online |
 |
Users browsing this forum: No registered users and 50 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
