Spirit System
https://www.spirit-system.com/phpBB3/

Version 1.2.0 released!
https://www.spirit-system.com/phpBB3/viewtopic.php?f=19&t=682		 Page 1 of 1
Author:  ZeXx86 [ Fri 29. May 2015 19:55:15 ]
Post subject:  Version 1.2.0 released!
Version 1.2.0 was released!

It brings many new features and improvements:
  • Governor support - Built-in governor with support for Electric, Nitro and Gasser helicopters!
  • Brand new Stabilisation - Significantly improved stabilisation mode with new possibilities.
  • 30 minute Logs - From now the unit can store 3 times longer flight events.
  • Spektrum SRXL - New protocol support in SRXL family.
  • Improved JETI model integration - Integration with Duplex is even smoother now.
  • Better calibration procedure - Calibration procedure can handle slower voltage rampup with various receivers now.
  • Sensor data processing - The way data are comming from the sensor is even faster.
  • Event capturing - Improved event capturing in the flight log.
  • Normal (Rate) mode - To fulfill needs of the scale pilots Normal gyro mode was updated.
  • Software updates - Various fixes and improvements were introduced in the software.
  • Flash procedure - Flashing process has double verification to make it even more reliable.
  • Spektrum Failsafe - Failsafe for the Spektrum satellites supports all available channels now.
  • Factory Settings - Factory settings were modified to make the tuning process even shorter.

Changes from previous version 1.1.0 in your settings:
  • All settings from previous version are untouched. You do not need to re-configure anything.

You can download it from our web pages!

Before flashing
To verify that the firmware was downloaded correctly you can use this online tool:
http://onlinemd5.com

Upload downloaded firmware file "spirit-fw-1.2.0.bin" from your HDD and then compare with the following:
c278ac87d7dc94832821d28873c703a6
Author:  ZeXx86 [ Sun 19. Jul 2015 11:39:49 ]
Post subject:  Re: Version 1.2.0 released!
Updated version 1.2.1 released

This version fixes only minor issues:
  • Failsafe compatibility - Updated failsafe for SRXL/SUMD/UDI and EX Bus.

NOTE: For Jeti receivers we recommend to disable Failsafe there to allow Failsafe feature from the unit.

Before flashing
To verify that the firmware was downloaded correctly you can use this online tool:
http://onlinemd5.com

Upload downloaded firmware file "spirit-fw-1.2.1.bin" from your HDD and then compare with the following:
72caea2a900bb6ad8264a753f16a83d4
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/