New version 3.4.4 released!
- Increased Gear Ratio range in the Telemetry window:
- Gear Ratio range was increased to allow a proper settings (1 - 32 ratio).
- Goblin RAW 420 and similar models can configure correct Gear ratio in the Telemetry window, same as in the Governor window.
- Spirit Settings for Linux on QT5 library:
- Spirit Settings software is using more recent library now.
- Compatibility on a different Linux distribution was improved by this change.
- Spirit Settings for Mac OS updated:
- Spirit Settings on some Mac systems was not showing GeoLink map properly.
- Libraries for Apple Mac systems were updated to support more image formats.
- Spirit Settings on a small screen:
- Spirit Settings with screen resolution such as 1440 x 900px will fit all content properly with all Operating Systems.
- HobbyWing v5 telemetry:
- Telemetry variables were showing 10 times lower values on some v5 ESCs.
- Current and Capacity measurement was fixed.
- GeoLink logging:
- Logging is enabled when unit will detect vibration level 3% and more.
- With some models logging was interrupted when vibration level was too low.
- RealTime logging:
- Logging is enabled when unit will detect vibration level 3% and more.
- With some models logging was interrupted when vibration level was too low.
Update for the Spirit Settings software is available in our Download section.
New firmware for the Spirit units is available online directly through the software.
NOTE: No changes in the settings are needed after update from the previous version 3.4.3.
|