Getting better. Thank you very much for your help.
Probably it will be a good setup:
| Attachments: |
700-800scale.4ds [255 Bytes]
Downloaded 145 times |
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Scale setup https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=892 |
Page 1 of 2 |
| Author: | mkgy [ Tue 15. Sep 2015 14:46:39 ] |
| Post subject: | Scale setup |
Question: Recommended setup the 700 size, 5 blade scale heli? Thank you for your reply. |
|
| Author: | mkgy [ Tue 15. Sep 2015 14:47:46 ] |
| Post subject: | Re: Scale setup |
No 3D, smooth scale flight. |
|
| Author: | ZeXx86 [ Tue 15. Sep 2015 16:07:57 ] |
| Post subject: | Re: Scale setup |
You should set Flight Style to 8, Cyclic Feed forward to 3-4. Rotation rates could be 8 or less and TX expos 25-40%. More problematic is mostly rudder if there is heavy fuselage so more tunning may be needed then. |
|
| Author: | mkgy [ Tue 15. Sep 2015 18:21:20 ] |
| Post subject: | Re: Scale setup |
Thanks. I will report on the developments. |
|
| Author: | mkgy [ Fri 18. Sep 2015 23:43:04 ] |
| Post subject: | Re: Scale setup |
Video: 0:46 sec: This is what could be? 3:08 sec: Rudder discontinuous. LOGÂ VIEWER: no error Otherwise a very good Spirit FBL system. Thank you in advance for your response. |
|
| Author: | mkgy [ Wed 23. Sep 2015 15:47:55 ] |
| Post subject: | Re: Scale setup |
Currently, using these settings: Delete... |
|
| Author: | ZeXx86 [ Wed 23. Sep 2015 16:14:15 ] |
| Post subject: | Re: Scale setup |
Thank you very much for the photos. You can save your profile in one file and send it here, so you do not have to take these shots at all. It could be caused by heavy tail. In this case you may try to increase Piro Consistency even more or to set Revomix which should compensate it well. For scale helicopters revomix is required probably in all cases. Maybe 3 points could be enough. |
|
| Author: | mkgy [ Thu 24. Sep 2015 18:47:32 ] | ||
| Post subject: | Re: Scale setup | ||
Getting better. Thank you very much for your help. Probably it will be a good setup:
|
|||
| Author: | ZeXx86 [ Fri 25. Sep 2015 15:00:45 ] |
| Post subject: | Re: Scale setup |
Thanks for your setup, it is OK. |
|
| Author: | mkgy [ Mon 12. Oct 2015 11:17:25 ] |
| Post subject: | Re: Scale setup |
So now flying in stormy winds with Spirit system  : |
|
| Page 1 of 2 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|