| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Gyro Mode Switching https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=6348 |
Page 1 of 1 |
| Author: | Mrhelicop [ Thu 13. Feb 2025 9:13:36 ] |
| Post subject: | Gyro Mode Switching |
I have spirit gt (latest firmware) on 2 align trex models, I am using radiomaster/edge tx, same radio model settings on both. All works accept the gyro mode on channel 5 which will not switch from heading lock to normal mode on one of the models but works fine on the other one. The dia page shows -100 to +100 working on both models. Any ideas? |
|
| Author: | ZeXx86 [ Thu 13. Feb 2025 9:22:42 ] |
| Post subject: | Re: Gyro Mode Switching |
Hello, Normal (Rate) mode is available only when Stabi - Function is set to Disabled or when it is set to Stabilisation (Scale). This could be reason why it does not work for you. |
|
| Author: | Mrhelicop [ Thu 13. Feb 2025 10:39:57 ] |
| Post subject: | Re: Gyro Mode Switching |
ZeXx86 wrote: Hello, Normal (Rate) mode is available only when Stabi - Function is set to Disabled or when it is set to Stabilisation (Scale). This could be reason why it does not work for you. Many thanks, that was the problem, all sorted now. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|