| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Towerpro MG92B Servo https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=4999 |
Page 1 of 1 |
| Author: | ianboom [ Fri 03. Dec 2021 12:11:41 ] |
| Post subject: | Towerpro MG92B Servo |
Hi. I have bought an old Trex450 as a Winter heli. It was flybar, but I'm converting it to flybarless. I have some Towerpro MG92B servos spare. Can anyone tell me what pulse and frequency setting I should set in the Spirit? Thanks. |
|
| Author: | ZeXx86 [ Mon 06. Dec 2021 17:28:20 ] |
| Post subject: | Re: Towerpro MG92B Servo |
Hi, maximum frequency is 60Hz. This is analogue servo and is unfortunately not recommended for FBL units. However it will work, but performance will be limited. |
|
| Author: | ianboom [ Tue 07. Dec 2021 10:45:35 ] |
| Post subject: | Re: Towerpro MG92B Servo |
Thanks for the reply. I thought it was a digital servo. Would this make any difference to the settings? https://www.servoshop.co.uk/index.php?pid=MG92B |
|
| Author: | ZeXx86 [ Tue 07. Dec 2021 11:06:01 ] |
| Post subject: | Re: Towerpro MG92B Servo |
I am sorry, it is really digital. However the frequency should be same. You can try to increase it to 150Hz and verify it is not hot in any condition. With higher frequency performance will be noticeable better. |
|
| Author: | ianboom [ Fri 10. Dec 2021 12:16:49 ] |
| Post subject: | Re: Towerpro MG92B Servo |
Many thanks for the reply. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|