| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Probleme mit der Telemetrie /SPM 4649T https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=3658 |
Page 1 of 1 |
| Author: | Börni1 [ Thu 28. Nov 2019 9:31:50 ] |
| Post subject: | [SOLVED] Probleme mit der Telemetrie /SPM 4649T |
819/5000 Hello I have problems with the integration menu. It can not be switched on (Rudder stick on the right and Aleron on the left) and is not displayed in the remote control display. There is also no indication of the receiver current in the telemetry data. My hardware: Remote control Spektrum IX12 Firmware: 2.00.80 Heli TREX 600 Receiver AR 7700 For telemetry SPM 4649T firmware: V1.1.10 Spirit Pro Firmware: 2.7.1 Spirit Geo Link configration: BEC to Spirit Aux 1 Second power supply from the controller to AR 7700 From the AR 7700 SRXL cable to Spirit Rudder entrance 1 Sat connected to AR 7700 Receiver telemetry SPM 4649T with Y-cable + and - on Rudder the orange cable to AIL. Did I do something wrong, please where is the mistake? Best Regards Börni1 |
|
| Author: | ZeXx86 [ Thu 28. Nov 2019 9:41:38 ] |
| Post subject: | Re: Probleme mit der Telemetrie /SPM 4649T |
Hello, yes, the AR7700 will not work together with SPM4649T receiver. You have to choose which one you will use. But SPM4649T offer telemetry and integration support. If using SPM4649T please select Spektrum DSM2/X receiver type. |
|
| Author: | Börni1 [ Thu 28. Nov 2019 10:31:34 ] |
| Post subject: | Re: Probleme mit der Telemetrie /SPM 4649T |
Hi Does that mean that I can take the SPM 4649T alone as a receiver? How then must the wiring be so that I can use the 12 channels of the IX12? Greeting Börni1 |
|
| Author: | ZeXx86 [ Thu 28. Nov 2019 10:47:54 ] |
| Post subject: | Re: Probleme mit der Telemetrie /SPM 4649T |
Hi, Yes. Please proceed according Spektrum integration diagram. http://manual.spirit-system.com/index.p ... ntegration |
|
| Author: | Börni1 [ Wed 04. Dec 2019 17:03:24 ] |
| Post subject: | Re: Probleme mit der Telemetrie /SPM 4649T |
Hi Thank you very much, worked great. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|