|
It is currently Thu 21. Nov 2024 19:29:51
|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 9 posts ] |
|
Author |
Message |
raptor-ea
|
Posted: Sat 18. May 2019 15:29:41 |
|
Joined: Sat 18. May 2019 14:59:10 Posts: 6
|
Hello,
this is my first spirit and i try to use it in a Raptor E550 stretched with 600er Tail. Hobbywing 120A V4 connected to Spirit for Gov and Telemtry Radio is a Taranis X9E. Fly with 1550 RPM Spirit is the Pro version with lates FW. Also installed is a Align DFC FBL Head.
I want to fly in position mode all the time. (I want to get the same feeling like the old HC 3A in Horizont mode)
All Setting before first flight are done and looks OK. And i set all setting¶meter to the recommend values. The first flight began Ok but after ~1 Minute the Heli shakes. The vibration (fuel) shows 90%. I can land the helicopter save but much longer and he was history.
First i check for static discharge and loose Parts. I can t found anything.
I start a second flight now with gyro settings 45. The heli start with shaking after some heavier cycle inputs. I reduce the gyro settings via taranis to 35. Now the flight was more stable but the helicopter was nervous on input. On this day it was windy ~15-20 km/h.
My questions are: 1. Why i must reduce the gyro setting so low? 2. Why the fbl is so agressive on input? 3. Can i initialyze the fbl in position mode and fly all the time? 4. any suggestions for better seetings. Flight style is beginner with no 3D
Regards Andreas
|
|
Top |
|
|
raptor-ea
|
Posted: Sat 18. May 2019 15:39:20 |
|
Joined: Sat 18. May 2019 14:59:10 Posts: 6
|
here are my settings
Attachments: |
Settings2-raptor.PNG [ 26.15 KiB | Viewed 1305 times ]
|
Settings-raptor.PNG [ 34.67 KiB | Viewed 1305 times ]
|
|
|
Top |
|
|
ZeXx86
|
Posted: Sun 19. May 2019 22:05:06 |
|
|
Site Admin |
Joined: Mon 29. Apr 2013 16:06:44 Posts: 12442
|
Hello,
probably you missed other important settings. For example Geometry 6° which is probably configured incorrectly.
You can start with a stabilisation mode.
_________________ Spirit System developer
|
|
Top |
|
|
raptor-ea
|
Posted: Tue 21. May 2019 6:22:49 |
|
Joined: Sat 18. May 2019 14:59:10 Posts: 6
|
Hello,
thanks for reply. I will check all the values again and report here for further actions.
Regards Andreas
|
|
Top |
|
|
raptor-ea
|
Posted: Tue 02. Jul 2019 15:13:07 |
|
Joined: Sat 18. May 2019 14:59:10 Posts: 6
|
Sorry for the realy late answer, but today i got my first free time (long enough to do that)
I write everything in a document and i hope i have all necessary stuff inside.
|
|
Top |
|
|
raptor-ea
|
Posted: Sat 06. Jul 2019 10:20:50 |
|
Joined: Sat 18. May 2019 14:59:10 Posts: 6
|
today is windy 30 km/h But i want to try a testfliught and i hope with the settings below the system works.
Andreas
|
|
Top |
|
|
raptor-ea
|
Posted: Tue 09. Jul 2019 6:20:22 |
|
Joined: Sat 18. May 2019 14:59:10 Posts: 6
|
the new flights are sucessfully. just only fine adjustment needed.
But sorry for the hard opinion: The hardware is very good, the software is good, the shop and shipment is good but the Forum here is the worsest part in this chain.
No or late response are not helpful. Here you can make some good improvements.
Regards Andreas
|
|
Top |
|
|
Habásek
|
Posted: Tue 09. Jul 2019 7:11:32 |
|
Joined: Sun 09. Jun 2013 13:14:17 Posts: 997 Location: Plzeň
|
Write your contributions to the English part, not to the Czech one. The answers will be faster.
_________________ Spirit System (Spirit W1, RS & GTR & all the others) Spirit Wave & JETI DS 12 http://www.habada.cz
|
|
Top |
|
|
ZeXx86
|
Posted: Fri 19. Jul 2019 13:28:19 |
|
|
Site Admin |
Joined: Mon 29. Apr 2013 16:06:44 Posts: 12442
|
I am afraid but the question was put in a wrong forum subsection. This section is used only for sharing configurations with other pilots.
_________________ Spirit System developer
|
|
Top |
|
|
|
Page 1 of 1
|
[ 9 posts ] |
|
|
Who is online |
|
Users browsing this forum: No registered users and 16 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|