Spirit System https://www.spirit-system.com/phpBB3/ |
|
New Logo 700 Set Up https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=1877 |
Page 1 of 1 |
Author: | gabs_mex [ Wed 08. Mar 2017 6:42:29 ] |
Post subject: | New Logo 700 Set Up |
What will be a good starting point for the new Mikado Logo 700 Logo 700 Set Up Motor: Scorpion 4525-520 ESC: Scorpion Tribunis 200 BEC/RX Pack: Internal BEC Servos: BK DS-7002 Cyclic & BK DS-7006 Tail FBL System: Spirit Pro / EX.Bus Jeti Rotor Blades: VTX 717 Batteries: Pulse 12s Stick 5000 mAh 45c / 2x6s Revolectrix Platinum 5200 mAh 40c Extra Notes Gearing: 14T/136T Headspeeds: 1800, 2000, 2150 |
Author: | ZeXx86 [ Wed 08. Mar 2017 9:01:24 ] |
Post subject: | Re: New Logo 700 Set Up |
Very nice setup! If I can suggest, get a different servo brand (but this is only my personal suggestion). For your setup nothing special is needed. You can just select Logo 600 or 800 preset and then it should work fine. Pirouette consistency will be somewhere around 175 or more. For your servo parameters you can check this table: http://manual.spirit-system.com/index.p ... Servo_list |
Author: | gabs_mex [ Wed 08. Mar 2017 21:26:04 ] |
Post subject: | Re: New Logo 700 Set Up |
way the servo suggestion? what are the problems that you know. |
Author: | ZeXx86 [ Wed 08. Mar 2017 22:32:28 ] |
Post subject: | Re: New Logo 700 Set Up |
I recommend MKS, alternatively Savox and Align will work well. I do not wish to talk about any product in regards of pros or cons (or possible failures). I want to avoid that you will suffer from issues that other users interfaced with these servos. I can tell you more details in private message if you are interested. But normally these servos working very well too. So if you have already bought them, it will work very likely good. |
Author: | gabs_mex [ Thu 09. Mar 2017 1:20:55 ] |
Post subject: | Re: New Logo 700 Set Up |
Hello, i will like to know more, can you send me a PM. Best Regards. |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |