| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| DSMX Bind problem. https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=1767 |
Page 1 of 1 |
| Author: | Bravo [ Thu 29. Dec 2016 22:45:58 ] |
| Post subject: | DSMX Bind problem. |
Using DX6i. and two DSMX sats Just received the Spirit pro today. It has the latest firmware and connects to the pc ok. I've tried 4 different sats with the same result. Sat leds glow steady orange. Status on Spirit pro goes on and off, color red, at a slow pace. Never saw rapid blinking on sats and status light never goes out. Thanks for the help. Larry Also... Did connect to PC and set RX type as DSMX/2 |
|
| Author: | ZeXx86 [ Fri 30. Dec 2016 13:46:53 ] |
| Post subject: | Re: DSMX Bind problem. |
Hello, first from all, you have to start the software and set the Receiver type to the Spektrum DSM2/X. Then it is very important to save the settings (with CTRL+S or in the Backup tab). After this, you can connect the bind plug and start the unit again. Then it should bind the satellite (including blinking). |
|
| Author: | Bravo [ Fri 30. Dec 2016 14:34:01 ] |
| Post subject: | Re: DSMX Bind problem. |
Thank you. Works now. Thought I had clicked on SAVE....but evidently did not. Cheers, Larry |
|
| Author: | ZeXx86 [ Fri 30. Dec 2016 14:39:12 ] |
| Post subject: | Re: DSMX Bind problem. |
Perfect, you are welcome! |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|