| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Triabolo 700 and Diabolo 550 (setup) https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=1651 |
Page 1 of 1 |
| Author: | gabs_mex [ Tue 20. Sep 2016 19:34:02 ] |
| Post subject: | Triabolo 700 and Diabolo 550 (setup) |
Hello, as mention before I just purchase a Triabolo 700 and have a Diabolo 550, im changing from BD3sx to Spirit Pro, will like to know for both helis, what setup should I use from the Model Presets, and what adjusted should I use, I recently install one in a Goblin Black Nitro and very please.. Triabolo 700 Flight Style: Soft 3D - Sport Motor: Xnova XTS 4435-460 Pinion: 18T Target Headspeed(s): 1200-1800HS ESC: HW160a Governor: HW Store Gov BEC: HW internal 7.4v Cyclic Servos: Savox SB-2282SG Tail Servo: Savox SB-2283MG Main Blades: NHP 680mm TriTail Blades: NHP 110mm Lipos: Revolextrix 5200 6S 40C Diabolo 550 Flight Style: Soft 3D - Sport Motor: Xnova 4020-1200KV Pinion: 20T Target Headspeed(s): 1700-2300HS ESC: HobbyWing platinum 100A v3 Governor: HW Store Gov BEC: HW internal 7.4v Cyclic Servos: MKS 9767 Tail Servo: MKS 9780 Main Blades: Cyclone 555mm Tail Blades: Rail 80.6 Lipos: Pulse 6s 4500mAh 45C Thank you. |
|
| Author: | ZeXx86 [ Wed 21. Sep 2016 17:40:39 ] |
| Post subject: | Re: Triabolo 700 and Diabolo 550 (setup) |
Hello I recommend to set the following parameters. Diabolo 550: Sensor/Cyclic Gain: 60-65% Sensor/Rudder Common Gain: 1.2x Sensor/Rotation speed: 10, 10 Advanced/Elevator Filter: 3 Rudder Delay: 0 Pirouette Consistency: 170-175 Triabolo 700: Sensor/Cyclic Gain: 50% Sensor/Rudder Common Gain: 1.4x Sensor/Rotation speed: 11, 10 Advanced/Elevator Filter: 3-4 Advanced/Cyclic Feed Forward: 4-5 Rudder Delay: 0 Pirouette Consistency: 180-190 Expo can be configured in your transmitter to 20-30% or as you like (for rudder, aileron, elevator). Nice helicopters! |
|
| Author: | gabs_mex [ Wed 21. Sep 2016 19:17:45 ] |
| Post subject: | Re: Triabolo 700 and Diabolo 550 (setup) |
Thank you very much, one las thing, when in wizard i should choose the default correct? Will post Files when I finish them.. |
|
| Author: | curmudgeon [ Thu 22. Sep 2016 15:26:39 ] |
| Post subject: | Re: Triabolo 700 and Diabolo 550 (setup) |
gabs_mex wrote: ...one las thing, when in wizard i should choose the default correct? That is still a mystery to me. Very easy to know what to do when the helicopter you are building is in the presets. But what do you do when your helicopter is not in the presets? Do you use a helicopter preset that most closely matches your helicopter size, or do you choose "default" helicopter? |
|
| Author: | ZeXx86 [ Thu 22. Sep 2016 15:37:34 ] |
| Post subject: | Re: Triabolo 700 and Diabolo 550 (setup) |
You can use default without any problem. You will rewrite the parameters with values that I have written, so basically it does not matter which profile you will select. Default is recommended for helicopters that are not in the list. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|