| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Voodoo 600 Settings https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=1543 |
Page 1 of 1 |
| Author: | nenno [ Sat 16. Jul 2016 9:59:10 ] | ||
| Post subject: | Voodoo 600 Settings | ||
Hi... here are my Voodoo 600 Settings My Setup: Swashplate-Servos : Futaba BLS 451 Tail-Servo : Futaba BLS 251SB Motor: Pyro 700-52 ESC : Kontronik Jive 80HV+ Tailblades: 110mm SAB Mainblades: NHP Razor2 620mm
|
|||
| Author: | ZeXx86 [ Sat 16. Jul 2016 20:00:12 ] |
| Post subject: | Re: Voodoo 600 Settings |
Hi, thank you very much! You can attach profile file directly (with 4DF extension). Then we can view it via integrated online viewer. |
|
| Author: | nenno [ Thu 21. Jul 2016 13:27:41 ] | ||||
| Post subject: | Re: Voodoo 600 Settings | ||||
ZeXx86 wrote: Hi, thank you very much! You can attach profile file directly (with 4DF extension). Then we can view it via integrated online viewer. Here are the 4ds-Files Nenno... PS.: I forget to mention that I use the original Servoarms from Plöchinger and the Rudder Gain in my TX is 60%
|
|||||
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
