Spirit System
https://www.spirit-system.com/phpBB3/

F3C and slow precision 3D
https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=1379		 Page 1 of 1
Author:  cgauvin [ Sun 24. Apr 2016 17:06:21 ]
Post subject:  F3C and slow precision 3D
Hello,

I know that it is really personnal choise according to how you like your heli to behave, but I would like to see your recommandation on the 2 following parameter to do F3C and slow precision 3D fly.

Cyclic Feed foward:?
Flying style:?

I'll do some testing at the field this week, and I'll share my preference.

Just curious to compare with other pilot for the same flying style

Thanks
Author:  cgauvin [ Sun 24. Apr 2016 22:10:37 ]
Post subject:  Re: F3C and slow precision 3D
Hey, I did a lot of testing today, and so fare, here are the setting i lit for doing slow 3D.

Cyclic feed foward: 1 or 2, still not sure
Flying style: 6

5% expo on the rudder
10% expo on elevator and aileron

Next weekend, I'll try rasing the cyclic foward and lowering the flying style, but I'am expexting that this setting will should be more oriented for hard 3D.
Author:  ZeXx86 [ Mon 25. Apr 2016 9:53:39 ]
Post subject:  Re: F3C and slow precision 3D
Hi,

it is hard to tell you what you should configure as each pilot have a different preferences.

Personally I like Flight style of 8 and higher Cyclic Feed Forward + expo around 20%. Higher Flight Style allows to control helicopter precisely around center, but still linearly + the response is immediate. Too high CFF is good for hard 3D.
Author:  cgauvin [ Sun 01. May 2016 16:34:32 ]
Post subject:  Re: F3C and slow precision 3D
Thank for your input.

I know that these parameter are really personal choice according to you flying style and skill level, but here is the setting I prefer for doing slow 3D.

Flying style, 6
Cyclic feed: 2
Expo on aileron and elevator: 15
Expo on rudder: 5

Cheer
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/