Hi guys

My name is Timo and i am a Henseleit factory pilot.

I do a nice setup for the light slowfly helicopter TDSF.

Very very happy with the result it fly awesome.


Important:
The model is very lightweight and can not handle very agressive settings and high gains.
Stay at the soft side all the time.
I recommend to stay around 50% +/- 5% Gain and rotation rate around 8-10.
A Cyclic Limit is 13 degrees works fine and you stay in the limit every time
Tail Gain around 80-100% are fine


Setup:
MKS HV9767 Servos at swash
MKS HV9780 Servo at tail
Henseleit superlight main blades
Xblades 96 at tail
( you can use other blades like the MS Rapid 690 only change the cyclic feed forward to 7 )






Happy flying
Timo

Hi,

Thanks for sharing your TDSF settings here.
Do you have something similar for TDF?

Guido

Hi Guido,

unfortunatley my TDF is crashed at the moment
But i think if you do a basic setup with the wizard it fly good too - You can´t go much wrong with the Spirit.

Regards
Timo

Thank you, I will start with this setup.

Hello Timo

My name is Martin Bezděk Thank you for your advice

Best regards

Martin

_________________
Jeti DC-24; Henseleit TDR, Henseleit TDF, Henseleit TDSF, Mikado Logo 600 SX, GM Heli Mi-17, SAB Goblin 630, OXY 5 Meg