Hello,

I know that it is really personnal choise according to how you like your heli to behave, but I would like to see your recommandation on the 2 following parameter to do F3C and slow precision 3D fly.

Cyclic Feed foward:?
Flying style:?

I'll do some testing at the field this week, and I'll share my preference.

Just curious to compare with other pilot for the same flying style

Thanks

Hey, I did a lot of testing today, and so fare, here are the setting i lit for doing slow 3D.

Cyclic feed foward: 1 or 2, still not sure
Flying style: 6

5% expo on the rudder
10% expo on elevator and aileron

Next weekend, I'll try rasing the cyclic foward and lowering the flying style, but I'am expexting that this setting will should be more oriented for hard 3D.

Hi,

it is hard to tell you what you should configure as each pilot have a different preferences.

Personally I like Flight style of 8 and higher Cyclic Feed Forward + expo around 20%. Higher Flight Style allows to control helicopter precisely around center, but still linearly + the response is immediate. Too high CFF is good for hard 3D.

_________________
Spirit System developer

Thank for your input.

I know that these parameter are really personal choice according to you flying style and skill level, but here is the setting I prefer for doing slow 3D.

Flying style, 6
Cyclic feed: 2
Expo on aileron and elevator: 15
Expo on rudder: 5

Cheer