It is currently Fri 22. Nov 2019 8:12:26

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Spirit Governor
PostPosted: Sun 27. Oct 2019 15:32:01 
Offline

Joined: Fri 26. Aug 2016 6:51:10
Posts: 166
Location: Austria
I have recently been using the internal governor of the spirit pro, the regulator is a Scorpion trinibus 200 in external regulator mode.
it works quite well, but I have two small problems:
1.) If the engine is turned off and then turned on again, then the engine is suddenly slowed down before it starts up again. It does not matter whether the engine with the main switch or with the bailout switch off and on, the problem only occurs when the engine is not completely stopped when switching back on.
2nd) the run up after the bailout is a bit strange, I have set 3 sec, while the rotor drives up to about two thirds of normal gas quickly, but the last third is then very sudden, sodas the rear turns away.

Ask for solutions, thank you


Top
 Profile  
 
 Post subject: Re: Spirit Governor
PostPosted: Tue 29. Oct 2019 15:42:36 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 9036
1) If throttle will go under 12% then rotor will be spooled up in a normal way, as from 0%. If % is higher than autorotation bailout is engaged.
2) Can you describe how Autorotation Bailout is engaged, please?

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Spirit Governor
PostPosted: Tue 29. Oct 2019 18:07:40 
Offline

Joined: Fri 26. Aug 2016 6:51:10
Posts: 166
Location: Austria
1) The problem is not the 12%, the problem is, the engine is decelerated suddenly, if he is not yet and I turn on too fast again. The startup then begins correctly. But the braking of the engine, I find very strange.
2) The autorotation bailout is activated with a gas straight with 13%, this gas straight is on a switch, as I have with all other controllers.
After the completion of bailout, the engine will ramp up normally quickly, but just before reaching the preset speed, the controller makes a sudden jerk up instead of steadily accelerating.


Top
 Profile  
 
 Post subject: Re: Spirit Governor
PostPosted: Wed 30. Oct 2019 15:11:01 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 9036
1) I am sorry but I dont understand you very well. The goal is to switch from idle RPM to flight RPM. If you will engage Throttle Hold the motor must shutdown immediately. If not then something wrong is configured in your radio.

2) Please attach your settings. It is very likely that your ESC is taking control of spoolup too.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Spirit Governor
PostPosted: Sun 10. Nov 2019 15:22:29 
Offline

Joined: Fri 26. Aug 2016 6:51:10
Posts: 166
Location: Austria
My controller (Scorpion Trinibus 200) is set to External Governor and therefore does not regulate anything.
Starting rate: Fast
Motor startup: 200us
Speed controller response: 8
Holding power: 7
Holding limit: 90%

Autorotation time 3sec


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .