It is currently Thu 28. Mar 2024 18:51:47

All times are UTC + 1 hour





Post new topic Reply to topic  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 02. Jul 2019 14:17:01 
Offline

Joined: Mon 24. Jun 2019 9:47:02
Posts: 5
Hi, my question is regarding the above metioned setup.

I use UniSens-E (under Graupner HOTT as GAM)to detect the used capacity and let the receiver tell me by using a switch.
Now - with the sprirt unit i have to decide whether i will use telemetry port for spirit setup or to use the UniSens-E unit.

My question: Is there any possible wireing to have both functions possible via the telemtry port? :?

regards
Peter


Top
 Profile  
 
PostPosted: Tue 02. Jul 2019 16:24:26 
Offline

Joined: Sun 23. Mar 2014 12:13:16
Posts: 261
Location: Černošice/Praha
Yes, you can use Y-cable. But before connecting of both components you have to set UnisensE or Spirit to EAM mode instead of GAM.

_________________
TDF, TDR, Logo 600SX, Oxy 4 Max @ 3Digi, VBar Neo, Spirit, Grapuner mz-32, mx-20


Top
 Profile  
 
PostPosted: Tue 02. Jul 2019 16:27:43 
Offline

Joined: Sun 23. Mar 2014 12:13:16
Posts: 261
Location: Černošice/Praha
See http://manual.spirit-system.com/index.p ... _Emulation how to change sensor emulation mode for Spirit

_________________
TDF, TDR, Logo 600SX, Oxy 4 Max @ 3Digi, VBar Neo, Spirit, Grapuner mz-32, mx-20


Top
 Profile  
 
PostPosted: Thu 04. Jul 2019 19:38:23 
Offline

Joined: Mon 24. Jun 2019 9:47:02
Posts: 5
TomasN wrote:
See http://manual.spirit-system.com/index.p ... _Emulation how to change sensor emulation mode for Spirit


this - i will try this - but what about the wires?
The unisons needs the red cable for power-supply. It is recommended that on the SYS-port of the spirit the must not be any voltage!!!

Did you cut the red wire or is it no problem?


Top
 Profile  
 
PostPosted: Thu 04. Jul 2019 20:04:31 
Offline

Joined: Sun 23. Mar 2014 12:13:16
Posts: 261
Location: Černošice/Praha
Use plus, gnd and signal between Unisens and receiver. And connect signal from receiver to Spirit. GND is already connected by another cable.

Attachment:
wiring.png
wiring.png [ 11.38 KiB | Viewed 582 times ]

_________________
TDF, TDR, Logo 600SX, Oxy 4 Max @ 3Digi, VBar Neo, Spirit, Grapuner mz-32, mx-20


Last edited by TomasN on Thu 04. Jul 2019 20:23:59, edited 1 time in total.

Top
 Profile  
 
PostPosted: Fri 05. Jul 2019 7:06:00 
Offline

Joined: Mon 24. Jun 2019 9:47:02
Posts: 5
TomasN wrote:
Use plus, gnd and signal between Unisens and receiver. And connect signal from receiver to Spirit. GND is already connected by another cable.

Attachment:
wiring.png



Thank you very much - i will try this!!!


Top
 Profile  
 
PostPosted: Sun 14. Jul 2019 7:59:12 
Offline

Joined: Mon 24. Jun 2019 9:47:02
Posts: 5
TomasN wrote:
Use plus, gnd and signal between Unisens and receiver. And connect signal from receiver to Spirit. GND is already connected by another cable.

Attachment:
wiring.png



I tried this an it works!!!!! :D :D

Great job thank you very much for your help!

Regards
Peter


Top
 Profile  
 
PostPosted: Fri 28. Feb 2020 11:02:29 
Offline

Joined: Mon 15. Oct 2018 4:19:55
Posts: 107
TomasN wrote:
Use plus, gnd and signal between Unisens and receiver. And connect signal from receiver to Spirit. GND is already connected by another cable.

Attachment:
wiring.png


Hi TomasN,

does it harm to connect GND ? Currently I have connected it and it works.

Thank you in advance for your feedback.

Best, Eugen


Top
 Profile  
 
PostPosted: Fri 28. Feb 2020 12:03:40 
Offline

Joined: Sun 23. Mar 2014 12:13:16
Posts: 261
Location: Černošice/Praha
Connecting also GND is ok . But single signal wire is enough and simplier.

_________________
TDF, TDR, Logo 600SX, Oxy 4 Max @ 3Digi, VBar Neo, Spirit, Grapuner mz-32, mx-20


Top
 Profile  
 
PostPosted: Fri 28. Feb 2020 12:30:04 
Offline

Joined: Mon 15. Oct 2018 4:19:55
Posts: 107
Thank you !


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .