It is currently Thu 28. Mar 2024 17:25:42

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 27. Nov 2018 23:32:55 
Offline

Joined: Mon 12. Nov 2018 19:27:54
Posts: 10
Hi,

The manual says:

Rudder end-points (tuning)
Left / Right limit - Sets the minimum and maximum deflection of rudder rotor blades. We
recommend setting these values for both directions to the maximum allowed range by the
manufacturer of the helicopter. Otherwise, the rudder may not be able to keep the yaw
direction during demanding maneuvers and tail blow outs may occur. Do not exceed
allowed limit for your model.

I am not sure what to do here. When I do adjust these -- either maximum or minimum, there is no visible effect on the travel of the bearing. Can you please provide some more information about what I am to do with this setting.

TREX-550X electric

Thanks
Jim


Top
 Profile  
 
PostPosted: Wed 28. Nov 2018 8:34:37 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hi,

your Gyro Gain limit is probably just too low or it is in the Normal/Rate mode.
You want to use Head Lock mode.

So if you used the end points to set limits then limits are fine for sure.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 28. Nov 2018 13:20:01 
Offline

Joined: Mon 12. Nov 2018 19:27:54
Posts: 10
Thank you. And what about using transmitter for servo travel? Should I avoid doing that and just use the Spirit configurations? Or is it okay to use transmitter functions for servo travel?

Thanks again
Jim


Top
 Profile  
 
PostPosted: Wed 28. Nov 2018 16:58:08 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Yes, definitively you should avoid using Servo Travel in the radio. It will have not desired effect.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 28. Nov 2018 23:05:42 
Offline

Joined: Mon 12. Nov 2018 19:27:54
Posts: 10
Thank you. Heading Lock was the issue. With that on, I was able to make the adjustments using the Spirit configuration for Rudder end points.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .