It is currently Thu 28. Mar 2024 18:26:08

All times are UTC + 1 hour





Post new topic Reply to topic  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sun 03. Dec 2017 13:34:50 
Offline

Joined: Sun 03. Dec 2017 13:18:01
Posts: 3
Hi, I just get a spirit black edition and discover FRSKy open tx...
thank you for your great work and support of your product. :P


:? I am not sure how to make the wiring between spirit and the the frsky xsr receiver just for a normal connection with no integration ( may be later...)
I see your post for micro spirit
viewtopic.php?f=20&t=2254

Is it the same way? should i use sbus or cppm?
sbus or cppm, gnd and +5V to the rudder channel of the spirit?

Thanks to confirm... i dont want to make mistakes.


Top
 Profile  
 
PostPosted: Sun 03. Dec 2017 17:37:55 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12211
Hi,

you are welcome!

If you want to use SBUS, you will need the SBUS Adapter cable for the Spirit (black edition) and red version.
But it seems that this receiver also offer PPM output which should be at CPPM.

So you will need cable between CPPM and RUD. +5V should be in the middle (red wire) and GND (black) at the last position.
Then you have to select PPM as the receiver type.

If you have SBUS invertor, you can use SBUS instead of CPPM.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 16. Feb 2018 18:18:35 
Offline

Joined: Fri 10. Mar 2017 17:27:00
Posts: 36
Hi Thomas

Can i use the S-BUS adapter to connect the XSR receiver to my Spirit Pro?


Top
 Profile  
 
PostPosted: Tue 20. Feb 2018 16:09:44 
Offline

Joined: Fri 10. Mar 2017 17:27:00
Posts: 36
Hi
Spirit Pro does not need an S bus adapter and works with SBUS, too?

LG


Top
 Profile  
 
PostPosted: Tue 20. Feb 2018 16:39:50 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12211
Yes. No SBUS adapter required.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 22. Feb 2018 17:25:02 
Offline

Joined: Fri 10. Mar 2017 17:27:00
Posts: 36
What is in the software to tune in Receiver, Futaba S-BUS?


Top
 Profile  
 
PostPosted: Thu 22. Feb 2018 17:50:51 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12211
Yes, with Futaba S-BUS it will work. But for XSR receiver you have to change output to SBUS, by default it is CPPM.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 22. Feb 2018 17:52:27 
Offline

Joined: Fri 10. Mar 2017 17:27:00
Posts: 36
Ok thanks!


Top
 Profile  
 
PostPosted: Thu 22. Feb 2018 18:06:17 
Offline

Joined: Fri 10. Mar 2017 17:27:00
Posts: 36
Hi Thomas
I think that only applies to the R-XSR. The standard XSR has an S-BUS output and a CPPM output. The operating instructions do not mention switching over with the XSR.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot], franz88 and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .