It is currently Thu 28. Mar 2024 12:06:12

All times are UTC + 1 hour





Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
 Post subject: Goblin Fireball
PostPosted: Thu 10. Aug 2017 15:11:18 
Offline

Joined: Mon 10. Oct 2016 0:45:02
Posts: 100
There is no file in the Model Presets for the Goblin Fireball.
Should I use the default or maybe the Goblin 380 ?
Thanks


Top
 Profile  
 
 Post subject: Re: Goblin Fireball
PostPosted: Thu 10. Aug 2017 15:31:01 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Yes, you can.
There is nearly no difference in the configuration.

But we will add the preset in the upcoming version :)

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Goblin Fireball
PostPosted: Thu 10. Aug 2017 18:45:47 
Offline

Joined: Fri 26. Aug 2016 6:51:10
Posts: 218
Location: Austria
The Hobby Wing controller in the Fireball has an RPM output.Can I infect the Spirit or comes the speed of the Uni cable?
How can I adjust the 24 poles of the motor?
LG Gernot

_________________
Greetings from Gernot


Top
 Profile  
 
 Post subject: Re: Goblin Fireball
PostPosted: Sat 12. Aug 2017 20:05:32 
Offline

Joined: Mon 10. Oct 2016 0:45:02
Posts: 100
Brand new Fireball with Tail Wag can't get rid of it.
Tail gain down to 30% can I go any lower ? Any high I get fast wag in Idle Up 3
Setup files attached. Will do vibration logs later today.
Any suggestions ?
Thanks


Attachments:
fballb2.4ds [255 Bytes]
Downloaded 110 times
fballb1.4ds [255 Bytes]
Downloaded 90 times
fballb0.4ds [255 Bytes]
Downloaded 85 times
Top
 Profile  
 
 Post subject: Re: Goblin Fireball
PostPosted: Sat 12. Aug 2017 20:14:52 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
What tail servo do you have?

Probably you will need to set Rudder Delay (decrease). Reducing Pirouette Consistency to 150 can improve it too.

It is also usual that new goblin kits needs "smoothening" of the tail mechanics since in certain angles it is not moving freely. Only then tail mechanics will perform well. Very often it is sorted by itself according the pilots after couple of flights.

Very important is that each ball joint is moving with absolutely no friction and there is no point that is causing additional slow down.

Tail gain should be around at least 50%, but it is also very dependent on the servo.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Goblin Fireball
PostPosted: Sat 12. Aug 2017 20:20:55 
Offline

Joined: Mon 10. Oct 2016 0:45:02
Posts: 100
Using the stock DS12T servo.
I'll make those changes along with striping down the tail and check it smoothness.
Report back tomorrow if it improves.


Top
 Profile  
 
 Post subject: Re: Goblin Fireball
PostPosted: Sat 12. Aug 2017 20:42:50 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
For this servo I recommend to set Rudder Delay to 0.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Goblin Fireball
PostPosted: Sun 13. Aug 2017 19:37:33 
Offline

Joined: Mon 10. Oct 2016 0:45:02
Posts: 100
Piro consistency set to 150, Rudder delay set to 0.
Tore down the tail assembly polished and oiled the tail shaft.
Tail gain at 50% seems better at lower head speed but at higher head speed
still getting the fast wag. Reduce the gain to get rid of fast wag but then have slow wag
at lower head speed. I don't see any vibration issues, logs attached.
Have any other suggestions ?


Attachments:
fbz.png
fbz.png [ 49.74 KiB | Viewed 1784 times ]
fby.png
fby.png [ 59.7 KiB | Viewed 1784 times ]
fbx.png
fbx.png [ 53.2 KiB | Viewed 1784 times ]
Top
 Profile  
 
 Post subject: Re: Goblin Fireball
PostPosted: Mon 14. Aug 2017 2:01:51 
Offline

Joined: Sun 02. Apr 2017 17:49:47
Posts: 46
just sorted my out , check the tail boom and frame make sure they are tight , and thurst bearing on tail with the smaller diameter out . same problem with my . it wasn t the spirit . good luck


Top
 Profile  
 
 Post subject: Re: Goblin Fireball
PostPosted: Sat 03. Feb 2018 17:28:08 
Offline

Joined: Sat 04. Feb 2017 20:17:19
Posts: 18
I have the same problem with commuting fast tail.
The tail is smooth running.
Servos are standard sab.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .