| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| [SOLVED] Can't Change Bank. https://www.spirit-system.com/phpBB3/viewtopic.php?f=35&t=2626 |
Page 1 of 1 |
| Author: | WickedTRX [ Thu 05. Jul 2018 22:06:31 ] |
| Post subject: | [SOLVED] Can't Change Bank. |
Hi, Had to take one of my Spirit Pro from one helicopter to try it out on a plane. The last one I bought haven't arrived yet and i'm really curious, worked perfect on the helicopter. It's strange I can't change to Bank 2, Can do it from 0 to 1 and back, can't go to 2, Please look at the short video on youtube https://www.youtube.com/watch?v=PO5H-NVLH5Y Edit: I can change bank while flying, I can't do it in the software to configure bank 2 same problem on 2 different computers |
|
| Author: | ZeXx86 [ Fri 06. Jul 2018 11:12:09 ] |
| Post subject: | Re: Can't Change Bank. |
Hi, it look like some settings are corrupted in Bank 2 for unknown reason. Maybe during loading from computer or because it was not Factory resetted after flashing Aero firmware. I recommend to save settings from all banks if possible to your computer. Then perform Factory reset in the Backup tab. And then load the settings from Bank 0, then Bank 1 (after switching to Bank 1) and then Bank 2 (after switching to Bank 2). This should solve it. |
|
| Author: | WickedTRX [ Fri 06. Jul 2018 17:59:27 ] |
| Post subject: | Re: Can't Change Bank. |
Ahoj, Done! Thank you for the fast reply! Made a backup of the settings, did a factory reset and restored the settings, solved it. Didn't though of doing a factory reset after changing to aero firmware, makes sense. Performance is impressive! I have noticed something that for me is totally secondary, when choosing to use a separate channel for rescue or stabilization you still loose gain rate. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|