Spirit System
https://www.spirit-system.com/phpBB3/

Bug Report: AUX output on Spirit GTR
https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=5860
Page 1 of 1

Author:  Konrad [ Sun 29. Oct 2023 15:28:57 ]
Post subject:  Bug Report: AUX output on Spirit GTR

I assigned a channel zu AUX, but no signal comes out on the aux port of Spirit GTR. I can use only CH0 as auxilliary channel. AUX was o.k. in prevous releases, but it does not work in 3.5.0
Konrad

Author:  ZeXx86 [ Sun 29. Oct 2023 20:20:16 ]
Post subject:  Re: Bug Report: AUX output on Spirit GTR

Thank you for the report.
But it works pretty well for us. There was no change for few years in this function.
I guess something else is wrong.

Author:  Konrad [ Mon 30. Oct 2023 19:51:28 ]
Post subject:  Re: Bug Report: AUX output on Spirit GTR

Thanks for the fast response.
The problem seems to be a defective Spirit GTR unit. The AUX output is always dead. See the attached screenshots of the scope.
I have a second Spirit GTR and I made a copy of the program in the Jeti and I also copies all banks to my second Spirit GTR.
The second Spirit GTR gives a 1.5ms signal on AUX, when no channel ist connected. And it works correctly, if I connect a channel to AUX. What can I do? Repair?
Konrad
Attachment:
File comment: Output of AUX
AUX PXL_20231030_173642146.jpg
AUX PXL_20231030_173642146.jpg [ 1.81 MiB | Viewed 313 times ]

Attachment:
File comment: Output of CH0
CH0 PXL_20231030_173520144.jpg
CH0 PXL_20231030_173520144.jpg [ 1.74 MiB | Viewed 313 times ]


Attachments:
File comment: Mapping of channels
Channels PXL_20231030_173737910.jpg
Channels PXL_20231030_173737910.jpg [ 6.74 MiB | Viewed 313 times ]

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/