I assigned a channel zu AUX, but no signal comes out on the aux port of Spirit GTR. I can use only CH0 as auxilliary channel. AUX was o.k. in prevous releases, but it does not work in 3.5.0
Konrad

Thank you for the report.
But it works pretty well for us. There was no change for few years in this function.
I guess something else is wrong.

_________________
Spirit System developer

Thanks for the fast response.
The problem seems to be a defective Spirit GTR unit. The AUX output is always dead. See the attached screenshots of the scope.
I have a second Spirit GTR and I made a copy of the program in the Jeti and I also copies all banks to my second Spirit GTR.
The second Spirit GTR gives a 1.5ms signal on AUX, when no channel ist connected. And it works correctly, if I connect a channel to AUX. What can I do? Repair?
Konrad