Spirit System
https://www.spirit-system.com/phpBB3/

Prevent motor spool-up when connected to USB/Bluetooth/Wifi
https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=3283
Page 1 of 1

Author:  jjuk [ Wed 24. Apr 2019 16:27:58 ]
Post subject:  Prevent motor spool-up when connected to USB/Bluetooth/Wifi

The motor only needs to spool-up when configuring the governor, so a tick box in the governor setup screen to enable the motor would be good to stop accidental spool-ups. The motor will turn off when governor setup screen is exited.

In all other screens, the motor will ALWAYS be disabled, regardless of throttle setting on the Tx.

Author:  Shonkonray [ Thu 25. Apr 2019 8:07:06 ]
Post subject:  Re: Prevent motor spool-up when connected to USB/Bluetooth/W

Then you wouldnt be able to use the vibration analysis!

Author:  jjuk [ Thu 25. Apr 2019 9:51:34 ]
Post subject:  Re: Prevent motor spool-up when connected to USB/Bluetooth/W

Shonkonray wrote:
Then you wouldnt be able to use the vibration analysis!


Ah yes, forgot about that. Enable the motor for that test too. But everything else should be disabled.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/