It is currently Thu 28. Mar 2024 23:14:25

All times are UTC + 1 hour





Post new topic Reply to topic  [ 2 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 10. Jan 2019 0:09:41 
Offline

Joined: Thu 10. Jan 2019 0:03:35
Posts: 39
Hi,

I am having problem with failsafe values on a Spirit non-pro. I have throttle at 0% and pitch at 50% (0 degrees) and I hit the "set" button for failsafes and save on the backup tab. I have tried this 3 times. The blades are visually at 0 degrees. When I disconnect and test, the blades are noticeably at quite high pitch, nothing like they were when I saved the values. What may cause this?

Thanks,

Rob


Top
 Profile  
 
PostPosted: Thu 10. Jan 2019 9:25:37 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hi,

it is dependent on your receiver/radio.
Some radios are storing its own Failsafe in the receiver as well.
So there are two failsafes.

You might need to reprogram the failsafe in your radio as well.

To test failsafe from Spirit unit just plug off the RX cable from unit.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .