It is currently Fri 29. Mar 2024 6:47:40

All times are UTC + 1 hour





Post new topic Reply to topic  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 23. Aug 2018 20:32:54 
Offline

Joined: Thu 28. Aug 2014 16:56:34
Posts: 32
Hi, while updating the Spirit unit firmware to 2.5.1 the aileron servo went to full travel about 60% of the way through the flashing procedure!
I was not sure what to do, afraid of disconnecting the unit in case of corruption, so let it finish updating.
The servo was buzzing away of course, but apart from getting a bit warm seems to be okay, and the unit took the update.
I thought I had better let you know.
Eric.


Top
 Profile  
 
PostPosted: Fri 24. Aug 2018 12:24:08 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hi,

unfortunately it is "normal" with some servos. They can't handle well condition when suddenly no signal is coming out of the Spirit unit.
This is independent on a version you are flashing or running.

Fortunately it look like we will find workaround in near future for the problem.
If you are afraid about the servos, we recommend to disconnect them before the update. But otherwise nothing wrong can happen.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 24. Aug 2018 22:29:31 
Offline

Joined: Thu 28. Aug 2014 16:56:34
Posts: 32
Ok thanks for the info.
I will unplug them in the future so.
Eric.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .