Spirit System
https://www.spirit-system.com/phpBB3/

Level before take off
https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=2751
Page 1 of 1

Author:  Tfmcnellis [ Tue 21. Aug 2018 0:48:15 ]
Post subject:  Level before take off

It would be nice that if using stabilization you can level the model at start up. I was thinking if during Spirit initialization and using stabilization,
the light would flash if model is out of level and it would stay solid if the model is level in all directions. You can take off under either condition. I currently use a 15mm round bubble spirit level and it works out well for the unit and a larger level on the Geolink. Makes it easy to level the entire model

Attachments:
A6830993-6EAB-475A-944F-3FADA9AC602B.jpeg
A6830993-6EAB-475A-944F-3FADA9AC602B.jpeg [ 1.82 MiB | Viewed 513 times ]
7DC9E6B5-1878-4BEA-B7B0-33EC5A65C3CA.jpeg
7DC9E6B5-1878-4BEA-B7B0-33EC5A65C3CA.jpeg [ 1.38 MiB | Viewed 513 times ]

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/