It is currently Wed 23. Sep 2020 16:48:01

All times are UTC + 1 hour

Post new topic Reply to topic  [ 2 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 06. Sep 2018 16:53:48 

Joined: Thu 06. Sep 2018 0:05:56
Posts: 1
Hi, I come from a fixed wing background and I use rx redundancy in almost all my models primarily using the RB-10 and now the RB-20. I treat as primary receiver a full range sbus capable receiver with sbus and telemetry capability (traditionally I tend to use X8R/X6R) and use an XM+ as a secondary receiver that has no telemetry output apart form rssi.

Now I could take the same apparatus (X6R & XM+ & RB-10) take the cases off and fit it on my Trex 450 but its still a bit bulky. However since I bought a spirit pro, that has the two side inputs for the spectrum satellite receivers, I was wondering whether it be possible to add the functionality in the firmware and allow people using sbus protocol to plug a second receiver with no telemetry capability onto the secondary input port?

PostPosted: Fri 07. Sep 2018 21:24:20 
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 9912

I am afraid this would be not possible. There are at least two technical issues that will not allow this.
For T-Rex 450 or bigger models it is generally fine to use X4R-SB or similar receiver. But yes, redundancy is always better.

Spirit System developer

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .