Spirit System
https://www.spirit-system.com/phpBB3/

BEC voltage telemetry from Spirit instead of ESC?
https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=2180
Page 1 of 1

Author:  simplechamp [ Tue 22. Aug 2017 20:09:45 ]
Post subject:  BEC voltage telemetry from Spirit instead of ESC?

For whatever reason HW decided to not include BEC voltage in their telemetry like all the other ESC mfgrs.

Would it be possible to take BEC voltage measured direct from Spirit and send that as telemetry value when HW v4 telemetry is selected?

Author:  ZeXx86 [ Tue 22. Aug 2017 20:14:02 ]
Post subject:  Re: BEC voltage telemetry from Spirit instead of ESC?

Unfortunately this is not technically possible.
But good thing is, that you can usually get this voltage directly from the receiver. Probably all telemetry capable receivers allow this.
So you can do so in this way and problem will be sorted.

If you are using Spektrum telemetry, you have one port available on the receiver which can measure any voltage.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/