Hi,
with Jeti and FrSky this feature can be programmed in your transmitter.
For HoTT it is possible only by our implementation - we already plan to add alarms for HoTT, so in future it will be there
Thank you for suggestion.
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Telemetry Alert (vibration level) https://www.spirit-system.com/phpBB3/viewtopic.php?f=24&t=1981 |
Page 1 of 1 |
| Author: | Windsurfer1976 [ Sat 20. May 2017 8:23:31 ] |
| Post subject: | Telemetry Alert (vibration level) |
Hi Thomas, since the spirit measures the vibration level, it would be great to set up a telemetry alert, if it exceeds a specified range. For example, if telemetrie reports vibration level via hott or jeti between 1-13 in flight, one could set 18 as alert limit. So, if there is a mechanical failure in flying, this could warn the pilot to land. Hope u understand my suggestion. Greetings Andreas Gesendet von meinem SM-G800F mit Tapatalk |
|
| Author: | Windsurfer1976 [ Sat 20. May 2017 8:27:26 ] |
| Post subject: | Re: Telemetry Alert (vibration level) |
I think this could be helpful for scale helis. For 3d pilots, the vibration range would be to wide. Gesendet von meinem SM-G800F mit Tapatalk |
|
| Author: | ZeXx86 [ Sat 20. May 2017 14:39:31 ] |
| Post subject: | Re: Telemetry Alert (vibration level) |
Hi, with Jeti and FrSky this feature can be programmed in your transmitter. For HoTT it is possible only by our implementation - we already plan to add alarms for HoTT, so in future it will be there Thank you for suggestion. |
|
| Author: | Windsurfer1976 [ Sat 20. May 2017 18:45:33 ] |
| Post subject: | Re: Telemetry Alert (vibration level) |
Thanks a lot Thomas [THUMBS UP SIGN][SMILING FACE WITH OPEN MOUTH AND TIGHTLY-CLOSED EYES] Gesendet von meinem SM-G800F mit Tapatalk |
|
| Author: | martino [ Mon 19. Jun 2017 8:30:49 ] |
| Post subject: | Re: Telemetry Alert (vibration level) |
Hopefully, you also plan to implement an alarm for consumed capacity as well ? Would be great. Telemetry works nearly perfect with an RCE-BL130A (I miss BEC voltage but no idea whether or not the ESC provides the data...). On the other hand, another telemetry screen shows the receiver voltage, so no problem at all. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|