Spirit System
https://www.spirit-system.com/phpBB3/

support geolink v2
https://www.spirit-system.com/phpBB3/viewtopic.php?f=21&t=5701		 Page 1 of 1
Author:  franz88 [ Tue 06. Jun 2023 9:16:17 ]
Post subject:  support geolink v2
I've created a support for geolink v2 for a goblin raw 580, I also blunted the angle for the laser.
There are 3 holes, 2 to use to maintain the support to the tail boom (30mm is boom, I made it 3mm wider for the bio-adhesive), and the central hole to keep the geolink to the support.
Use tape and electrical ties.
Attachment:
supportgeolinkv2.jpg
supportgeolinkv2.jpg [ 128.37 KiB | Viewed 902 times ]

Attachment:
GEOLINK V2 GOBLIN RAW 580.rar [34.72 KiB]
Downloaded 52 times
Author:  franz88 [ Tue 06. Jun 2023 14:08:14 ]
Post subject:  Re: support geolink v2
Attachment:
351490757_638196247910546_2865321245051519890_n.jpg
351490757_638196247910546_2865321245051519890_n.jpg [ 586.64 KiB | Viewed 886 times ]

Attachment:
351137110_225378620377873_3367758606367773104_n.jpg
351137110_225378620377873_3367758606367773104_n.jpg [ 612.48 KiB | Viewed 886 times ]

Attachment:
345299817_627011816009831_4345918158636857710_n.jpg
345299817_627011816009831_4345918158636857710_n.jpg [ 712.65 KiB | Viewed 886 times ]
Author:  franz88 [ Sat 13. Apr 2024 8:23:20 ]
Post subject:  Re: support geolink v2
example on how to mount geolinks
PS
on the geolink connector I put some hot glue, I think this is wrong

Attachments:
20230801_192518.jpg
20230801_192518.jpg [ 181.22 KiB | Viewed 630 times ]
20230706_163905.jpg
20230706_163905.jpg [ 163.81 KiB | Viewed 630 times ]
20230801_192721.jpg
20230801_192721.jpg [ 144.59 KiB | Viewed 630 times ]
Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/