Spirit System
https://www.spirit-system.com/phpBB3/

Spirit pro (Channel 0 missing).
https://www.spirit-system.com/phpBB3/viewtopic.php?f=21&t=3661
Page 1 of 1

Author:  Syngorextor [ Fri 29. Nov 2019 23:22:04 ]
Post subject:  Spirit pro (Channel 0 missing).

:( Hello, quite suprise with new Spirit-Pro missing channel (0). We need this channel for extra power (external ubec), unfortunetly has been downgraded and quite disapointed.
Thank you... :roll:

Author:  10x [ Fri 29. Nov 2019 23:26:32 ]
Post subject:  Re: Spirit pro (Channel 0 missing).

Its a Spirit 2, Perhaps when the new Spirit-Pro 2 comes out it will have channel 0.... :D

Author:  urgno [ Sat 30. Nov 2019 9:51:51 ]
Post subject:  Re: Spirit pro (Channel 0 missing).

by the way you can connect extra power ubec using the heavy duty Y available on store
https://store.spirit-system.com/en/acce ... cable.html

Author:  Syngorextor [ Sat 30. Nov 2019 12:44:22 ]
Post subject:  Re: Spirit pro (Channel 0 missing).

;) Thanks guys, but quite disapointed and cancelled the order. Thank you for your respond and going to have the (old) spirit pro soon. 8-)

Author:  ZeXx86 [ Sat 30. Nov 2019 13:38:22 ]
Post subject:  Re: Spirit pro (Channel 0 missing).

There is no new Spirit Pro :)
There is new Spirit 2 which is successor of the original Spirit units.
Old Spirit units have one port less and still it was enough for running 800 class helicopter.

With Spirit 2 you can connect up to 3 BEC leads what is enough for the most helicopters.
For people that need 4 BEC/powering leads there is Spirit Pro :)

So likely it is misunderstanding in meaning of the units.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/